Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series 16 inch full extension drawer slides use a full extension design so the 16 inch slide length lets the drawer travel its full distance, which gives clear access to stored items along the entire drawer depth. The side mount layout places the slide on the cabinet sides, which suits standard face frame or frameless cabinetry where lateral support is needed along the drawer box. A 100 lb weight rating defines the load these slides are designed to carry, which supports typical kitchen, bath, and shop drawer contents within that range. Standard ball bearing construction provides rolling contact between the members, which supports consistent drawer travel under load. Continuous bearings run the full length of the slide, which supports smooth and quiet performance through the stroke. The black finish covers the visible steel surfaces, which helps the hardware visually blend with darker cabinet interiors or drawer boxes.
The side mount configuration defines how these slides attach, which places each member on the cabinet and drawer sides for a familiar layout in many residential and commercial cabinets. A 32mm pattern designation notes that the slides align with 32mm system hole spacing, which speeds installation in casework drilled to that standard. Side clearance of 1/2 inch plus 1/32 inch minus 0 sets the space required each side, which directs drawer box width so the members engage properly through the stroke. Recommended fasteners of #8 x 7/16 inch Phillips pan head tie the slides to wood components, which matches common shop inventory for building or retrofitting cabinets. Fixed rear brackets are available for this slide, which supports mounting to cabinet backs when side structure needs additional support at the rear.
This Pro Value Series 16 inch full extension side mount ball bearing slide fits applications where drawers need full access within a 16 inch depth, which suits many base cabinets, vanities, and utility cabinets built around that nominal length. The side mount design positions the members along the drawer sides, which works with standard box constructions that leave flat, parallel mounting surfaces along both sides. A specified side clearance of 1/2 inch plus 1/32 inch minus 0 per side defines the total drawer-to-opening gap, which supports consistent alignment when both sides are built to that measurement. The 32mm pattern designation means the slide hole layout corresponds to 32mm system drilling, which integrates with casework and jigs based on that standard for repeatable hole locations. Industry ratings of BHMA, KCMA, BIFMA, ANSI, and SEFA 8.99 identify that the slide meets those referenced industry performance and test standards, which supports use in projects that rely on those benchmarks.
Full extension travel on a 16 inch slide length lets the drawer move its complete length out of the cabinet, which exposes the back of the drawer for easier access and inventory of stored items. Standard ball bearing design distributes movement along rolling elements, which helps the drawer glide under load rather than sliding metal-on-metal. Continuous bearings provide rolling contact along the length instead of at isolated points, which promotes smooth and quiet operation from closed to fully open positions. The unhanded design allows either slide member to work on left or right sides, which simplifies inventory and installation since one model number covers both positions. A lever disconnect feature lets the drawer member release from the cabinet member, which supports removal of the drawer box for adjustments, finishing, or service without disturbing the cabinet side installation. Cold rolled steel material creates rigid channels for the bearing races, which supports maintaining alignment across the stroke for consistent engagement at full extension.
The Pro Value Series 16 inch full extension drawer slides are sized for drawers built around a 16 inch slide length, which matches many standard cabinet and vanity drawer depths.
The Pro Value Series 16 inch full extension drawer slides use 1/2 inch plus 1/32 inch minus 0 side clearance per side, which guides drawer box width for proper slide engagement.
The Pro Value Series 16 inch full extension drawer slides have a 100 lb weight rating, which defines the drawer loads they are intended to support in service.
The Pro Value Series 16 inch full extension drawer slides use a lever disconnect, which lets the drawer member separate from the cabinet member for finishing, adjustment, or access.
The Pro Value Series 16 inch full extension drawer slides follow a 32mm pattern, which aligns with system-drilled cabinets that use 32mm spaced mounting holes.
The Pro Value Series 16 inch full extension drawer slides use cold rolled steel with a black finish, which provides rigid members with a dark appearance in cabinet interiors.
The Pro Value Series 16 inch full extension drawer slides combine a 100 lb weight rating, side mount configuration, and full extension travel, which supports many common cabinet drawer layouts at this depth. A defined side clearance of 1/2 inch plus 1/32 inch minus 0 provides a clear sizing target for drawer box width, which helps align production runs or retrofit work around a repeatable measurement. Continuous ball bearings within cold rolled steel members support smooth and quiet movement, which suits residential and commercial drawers that open and close throughout the day. When a black finish, 32mm pattern, unhanded layout, and lever disconnect match your cabinet build approach, these slides offer a coordinated option for 16 inch drawers.
Sold In: 30 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each |  WW46000 Mfr# 3670000235961 1000 | Würth #8 x 7/16" Truss Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Zinc, 3670000235961 1000 - 1000/Box |