Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series 22 inch full extension drawer slides use a standard ball bearing design, so the drawer member moves fully out of the cabinet and exposes the usable drawer length for easier access during everyday work. The 22 inch length defines the drawer depth these slides are intended to support, keeping layouts consistent across a run of cabinets. A 100 lb weight rating ties directly to load planning, allowing drawers to carry typical tools, hardware, or kitchen contents within that limit. Cold rolled steel construction provides a rigid track for the ball bearings, helping the slide maintain alignment under rated loads. The black finish gives the hardware a dark, uniform appearance that visually recedes under the drawer, which can be important on exposed or open cabinet designs. Continuous bearings support the moving member along its travel, which promotes smooth and quiet performance in repeated open-and-close cycles.
This Pro Value Series side mount drawer slide is classified as a side mount drawer slide, so it is intended to be fastened to the cabinet side and the side of the drawer box. The specified side clearance of 1/2 inch plus 1/32 inch -0 per side guides the gap that must exist between the drawer and cabinet, which is central to getting free movement without excess play. The 32mm pattern reference aligns hole locations with a common cabinet drilling system, which is useful when working with line-bored cases or CNC-drilled panels. Recommended fasteners are #8 x 7/16 inch Phillips pan head, tying the slide to a specific screw size and head style so the slide holes seat the fastener properly. A lever disconnect feature allows the drawer member to be separated from the cabinet member, which can simplify installing or removing drawers during shop fitting or field adjustment.
This product is part of the Pro Value Series PRO 2.0 Series side mount drawer slides, placing it in a class of hardware used for standard drawer applications in cabinets and casework. The ball bearing design positions bearings between the cabinet and drawer members, so the moving member rides on steel elements that support smooth travel under rated loads. Being industry rated to BHMA, KCMA, BIFMA, ANSI, and SEFA 8.99 identifies that the slide has been evaluated against multiple industry benchmarks, which matters when projects reference those standards in their cabinet hardware requirements. The unhanded configuration means the same member style installs on either the left or right side, which helps streamline installation steps on repetitive cabinet runs. Fixed rear brackets are listed as available, giving installers an option for supporting the rear of the slide when cabinet construction or layout favors bracket mounting at the back.
Continuous bearings along the slide path support the drawer through its full extension, so contact is spread across multiple bearing points rather than isolated locations, which promotes smoother and quieter performance over repeated cycles. Full extension movement allows the 22 inch drawer member to travel its complete length, keeping the closing action predictable from fully open to fully closed without partial travel stops. The cold rolled steel material creates a straight, stable path for the bearings to run against, which supports alignment when drawers are loaded within the 100 lb rating. The lever disconnect feature lets installers separate the drawer member from the cabinet member during fitting, which can streamline drawer box installation and later service when cabinets are already installed. The black finish visually ties the slide to dark cabinet interiors, which can reduce visual distraction around the slide hardware while drawers operate on the ball bearing runners.
This Pro Value Series model is a side mount, standard ball bearing, full extension drawer slide, so it supports typical cabinet drawers that travel fully out of the cabinet on ball bearing runners.
The 22 inch slide is designed for drawers built around a 22 inch member length and carries a 100 lb weight rating, which guides how deep and heavily loaded each supported drawer can be.
The slide uses a side clearance of 1/2 inch plus 1/32 inch -0 on each side, so drawer box widths are planned to leave that gap between the drawer sides and the cabinet sides.
The slide references a 32mm pattern for mounting and lists #8 x 7/16 inch Phillips pan head fasteners as recommended, aligning it with common line-bored cabinet construction.
The lever disconnect allows the drawer member to separate from the cabinet member, which can simplify drawer removal during shop assembly, finishing, or later service work.
The BHMA, KCMA, BIFMA, ANSI, and SEFA 8.99 ratings indicate the slide has been evaluated against recognized industry standards, supporting its use where such hardware criteria are specified.
The Pro Value Series 22 inch full extension standard ball bearing drawer slides in black combine a 100 lb rating, side mount design, and 32mm pattern, giving cabinet builders a clear set of dimensions and performance details to plan drawer construction and hardware layouts effectively.
Sold In: 40 Each