Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series 18 inch full extension drawer slides use a standard ball bearing design to let drawers travel the full length of the 18 inch slide, giving access to the back of the drawer on cabinets built around this length. The 100 lb weight rating supports typical residential and light commercial drawer loads, allowing these side mount slides to handle everyday use in cabinet installations that match the rating. The unhanded side mount layout lets the same slide work on either side of the drawer, simplifying layout when setting up pairs on production runs. A lever disconnect feature allows the drawer member to release from the cabinet member at the lever, which helps during installation or removal when finishing interiors or servicing hardware. Continuous bearings support the moving members along the full travel, which keeps motion smooth and quiet when the drawer opens and closes.
The side clearance of 1/2 inch plus 1/32 inch -0 indicates the space to allow on each side of the drawer box, so box widths can be sized accurately to the opening for these side mount slides. The recommended fasteners of #8 x 7/16 inch Phillips pan head define a screw size and head style that fits the mounting holes, which helps the slide seat properly against cabinet and drawer members. A 32mm pattern built into the slide suits cabinets laid out on that system, allowing installers to align mounting with existing hole rows instead of measuring every location. The unhanded side mount design reduces orientation issues during mounting, since either member can be used on left or right positions without separate part numbers.
This Pro Value Series 18 inch full extension standard ball bearing drawer slide is a side mount drawer slide for cabinet projects needing 18 inch travel and a 100 lb rating. In cabinet interiors built on the 32mm pattern, the slide matches those hole spacings, helping it integrate with system-based casework layouts. The 1/2 inch plus 1/32 inch -0 side clearance spec fits openings sized for that common gap, so drawer box widths can be planned around this measurement when building new boxes. The unhanded cabinet and drawer members allow the same part to serve either side, which is useful on jobs where multiple drawers of the same size repeat across a run of cabinets.
The black finish on the cold rolled steel slide suits darker cabinet interiors, allowing the hardware to visually recede when drawers are open. Continuous bearings along the members support the rated 100 lb loads while moving, which helps drawers open and close with even resistance across the full 18 inch extension. The lever disconnect between cabinet member and drawer member lets installers separate components after layout, which can aid in finishing or transporting cabinet sections while keeping the hardware alignment set by the initial installation.
The 100 lb rating on this Pro Value Series side mount ball bearing slide sets a performance level for drawers carrying moderate loads, guiding builders when selecting it for applications that fall within this range. Full extension travel equal to the 18 inch length brings the drawer front past the cabinet face enough to expose the rear, which supports efficient access and easier loading in storage applications. The 32mm pattern aligns fastener locations with standard cabinet drilling, reducing layout steps and supporting consistent positioning from cabinet to cabinet.
Cold rolled steel construction forms the structural members that carry the continuous bearings, which helps maintain slide geometry when drawers are repeatedly cycled under rated loads. The recommended #8 x 7/16 inch Phillips pan head fasteners match the slide hole design, which supports secure mounting and helps keep the members aligned during operation. The unhanded design and lever disconnect feature together simplify installation sequences, because installers can mount cabinet members first, attach drawer members to boxes, then engage or release the drawer as needed without tracking left and right specific parts.
This Pro Value Series 18 inch side mount ball bearing slide has a 100 lb weight rating, so drawers designed within that load can operate within the stated performance range.
The slide provides full extension based on its 18 inch length, allowing the drawer to move out approximately the full slide length for access to the rear area.
These side mount slides call for 1/2 inch plus 1/32 inch -0 clearance per side, guiding the difference between the cabinet opening width and drawer box width.
The slide has a 32mm pattern, so its mounting holes align with cabinets drilled on the 32mm system, simplifying installation in that construction style.
The slide is made from cold rolled steel with a black finish, combining structural support with a dark appearance that matches darker cabinet interiors.
The slide uses a lever disconnect, allowing the drawer member to release from the cabinet member, which can simplify handling during mounting or removal.
This Pro Value Series 18 inch full extension standard ball bearing drawer slide matches cabinet projects that use 18 inch deep boxes, 1/2 inch plus 1/32 inch -0 side clearance, and a 100 lb load target. The cold rolled steel construction, black finish, 32mm pattern, and unhanded design support straightforward installation in system-built or custom cabinets matching these dimensions. Choose this 0112.012.00418A-BK slide when the job calls for full extension travel, side mount layout, and BHMA, KCMA, BIFMA, ANSI, SEFA 8.99 industry-rated performance.
Sold In: 40 Each