Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Series 18 inch full extension drawer slides use a standard ball bearing design to let the drawer travel the full 18 inch length, which allows the entire drawer box to clear the cabinet face for better access to stored contents during everyday use. These drawer slides are built as a side mount system, so they reference off the cabinet side for positioning and keep the drawer tracking straight along the carcass wall in typical cabinet construction. The slides are rated for 100 lb, which supports common residential and light commercial drawer loads without overbuilding the hardware for standard storage applications. An unhanded layout means the same member can be used on either left or right side, helping streamline layout and reduce part sorting at the bench. The slides are part of the PRO 2.0 Series, giving a consistent family reference when matching to other runs.
These side mount ball bearing slides use a 1/2 inch side clearance with a plus 1/32 inch -0 tolerance, which sets a clear target when sizing drawer widths against the cabinet opening so the drawer moves freely without excessive side play. The 18 inch length means the slide footprint matches common 18 inch drawer depths, which simplifies layout for cabinet depths designed around that dimension. A 32mm pattern is provided, so hole locations align with standard 32mm cabinet system drilling, which helps speed installation in production environments using line boring equipment. Recommended fasteners are #8 x 7/16 inch Phillips pan head, which are sized to clamp the slide securely to typical cabinet side materials without excessive breakout on thinner stock.
These Pro Value Series 18 inch full extension slides work in side mount applications where the cabinet construction provides stable vertical sides, so the slide members have continuous support from front to back. The side clearance of 1/2 inch plus 1/32 inch -0 matches drawer boxes built for standard face frame and frameless openings that are set up around that common gap, so existing shop jigs and workflows built on 1/2 inch clearance remain usable. The 18 inch length pairs well with base and wall cabinets designed around an 18 inch internal depth, so the slide length is fully supported within the case and the drawer back does not overrun the cabinet. A black finish on cold rolled steel keeps the hardware less noticeable inside dark-stained or painted cabinets, which supports cleaner visual lines on open drawers in kitchens, baths, and built-ins.
The 32mm pattern on these side mount ball bearing slides ties into standard system drilling, so installers using 32mm line boring can register the slide consistently from cabinet fronts and edges and get repeatable drawer alignment across a run. Continuous bearings in the slide provide smooth and quiet performance along the full travel, which reduces chatter when drawers are opened to full extension and supports a more controlled feel under load. The lever disconnect allows the drawer member to separate from the cabinet member, so drawers can be fitted, adjusted, and finished on the bench while the cabinet members stay fixed in the case, helping maintain alignment once installed. A 100 lb weight rating gives a clear load capacity target, so drawers can be planned for typical storage tasks within that limit rather than guessing performance. Fixed rear brackets are available for this series, which gives an option to support the back of the slide where direct screw attachment into the cabinet back is not preferred.
The Pro Value Series 18 inch model is a side mount, full extension, standard ball bearing drawer slide, so it supports drawers that need full access and mount to cabinet sides.
These 18 inch drawer slides have a 100 lb weight rating, which supports typical residential and light commercial drawer loads without overbuilding for standard storage.
These slides use 1/2 inch side clearance with a plus 1/32 inch -0 tolerance, which guides drawer box width so the slides run freely without binding in the opening.
These 18 inch slides have a 32mm pattern, so screw positions align with cabinet sides drilled on a 32mm system for faster, repeatable mounting.
These drawer slides are made from cold rolled steel with a black finish, which provides a solid metal track and a dark appearance that blends with many interiors.
The lever disconnect lets the drawer member release from the cabinet member, so drawers can be installed or removed while keeping cabinet members fixed for consistent alignment.
The Pro Value Series 18 inch full extension standard ball bearing drawer slides combine a 100 lb rating, 1/2 inch side clearance, and a 32mm pattern in a black cold rolled steel body, so they align with common cabinet layouts. For projects built around 18 inch drawer depths and side mount hardware, these unhanded PRO 2.0 Series slides provide full extension travel, lever disconnect, and industry ratings including BHMA, KCMA, BIFMA, ANSI, and SEFA 8.99 that support use in typical woodworking and casework environments.
Sold In: 40 Each