
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Pro Value Series 24" full extension drawer slides give a 24" drawer full travel, so the drawer member pulls completely out of the cabinet, which exposes the back of the drawer for easier access and layout of stored items. The 100 lb weight rating supports typical drawer loads in many shop-built and commercial cabinets, so drawers operate within the rated capacity when sized and loaded appropriately. The side mount design fits standard side-mount drawer construction, so these slides integrate into common cabinet carcass layouts without redesigning the box. The 1/2" plus 1/32" -0 side clearance spec gives a defined gap between the cabinet member and drawer member, which lets you size the drawer width for consistent running clearance. The standard ball bearing construction supports the drawer on rolling elements, which reduces friction during opening and closing.
The side mount configuration places each slide on the cabinet side and drawer side, which suits frameless and face-frame cabinets built for side-mount hardware. The unhanded design means each slide works on either the left or right side, which simplifies inventory and layout because one member type fits both sides. The lever disconnect lets you separate the drawer member from the cabinet member, which allows you to mount each piece to cabinet and drawer independently before re-engaging the mechanism. The recommended fasteners of #8 x 7/16" Phillips pan head (WW46000) match the slide's mounting areas, which supports firm attachment into the cabinet side and drawer side without protruding excessively into the slide path.
The 24" length suits drawers that extend 24" from the cabinet, which matches common base cabinet depths in many shop and commercial layouts. The slide is classified as a side mount drawer slide, so it works where the cabinet design allocates space at each side of the drawer box. The specified 1/2" plus 1/32" -0 side clearance on each side drives the drawer box width, which allows you to size the drawer so the ball bearing members run without binding or excessive play. The 32mm pattern aligns with system holes drilled on 32mm centers, which fits into cabinet carcasses built around that standard and reduces layout time. The black finish offers a dark, uniform appearance along the cabinet and drawer members, which keeps the hardware visually consistent with other black components in the installation.
The standard ball bearing design uses continuous bearings along the travel path, which distributes load over multiple rolling elements to support smooth and quiet performance as the drawer moves. The continuous bearings are described as ensuring smooth and quiet performance, which reduces noise and effort when opening and closing drawers in work or residential spaces. The lever disconnect enables quick separation of the drawer member, which makes it easier to remove drawers for adjustments or service without unfastening the cabinet member. Fixed rear brackets are available for this slide, which gives an option to secure the rear of the slide in cabinet constructions that benefit from bracket mounting at the back. The slide holds industry ratings of BHMA, KCMA, BIFMA, ANSI, and SEFA 8.99, which indicates the design has been evaluated against commonly used performance standards in the hardware and furniture field.
The Pro Value Series 24" full extension drawer slides are 24" long, which suits drawer boxes designed for 24" travel from the cabinet front in typical base cabinet depths.
The 100 lb rated 24" drawer slide supports drawers carrying up to 100 lb, which fits many residential and light commercial storage applications when drawers are built and loaded within that range.
The side clearance 1/2" plus 1/32" -0 per side sets the gap between cabinet and drawer, which guides you to size drawer width for consistent running clearance on both sides.
The Pro Value Series side mount drawer slides attach to the cabinet sides and drawer sides, which suits constructions built with space at each side of the drawer box for hardware.
The cold rolled steel drawer slide uses steel members with a black finish, which provides a stable track for the bearings and a dark appearance that coordinates with black hardware.
The BHMA rated drawer slide also carries KCMA, BIFMA, ANSI, and SEFA 8.99 industry ratings, which ties its performance to commonly referenced cabinet and furniture standards.
The Pro Value Series 24" full extension drawer slides pair a 100 lb rating with side mount installation, which aligns with many cabinet layouts needing full drawer access. The 1/2" plus 1/32" -0 side clearance and 32mm pattern give defined layout points, which streamline drawer sizing and hole placement for repeatable builds. The cold rolled steel construction, black finish, and continuous ball bearings support smooth movement under load, which suits drawers in workspaces and residential cabinets. The unhanded design, lever disconnect, and available fixed rear brackets round out the mounting options, which lets these slides fit into a range of side-mount cabinet constructions.
Sold In: 60 Each