Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune ESR-3813 is a 14 inch, full-extension, side-mount ball-bearing drawer slide machined from 304 stainless steel for environments where moisture, cleaning chemicals, or salt air make standard plated slides a maintenance problem. A built-in hold-in anti-rebound detent keeps the drawer shut between uses without locking it in place. Sold per pair.
Zinc-plated and epoxy-coated slides corrode quickly in commercial kitchens, laboratory casework, healthcare carts, marine galleys, and any setting where moisture or cleaning agents are routine. The ESR-3813's 304 stainless steel construction handles these conditions without the rust staining, seizing, or finish breakdown that plated slides develop over time. The hold-in anti-rebound detent adds a practical benefit in these same settings: drawers on mobile carts, service stations, and food-prep counters stay shut during work and transit, and do not pop back open after closing. This is a standard-motion slide beyond the detent — there is no soft-close damper, which suits applications where a free-cycling drawer is preferred or where the detent does the retention work on its own.
The slide members are 304 stainless steel throughout — the corrosion-resistant alloy itself, not a plated or coated finish over a different base metal. In indoor washdown settings, 304 stainless offers long service life without the maintenance zinc-plated slides require. For continuous salt-water or marine-grade exposure, verify that 304 meets the corrosion requirement for your specific environment; for harsher conditions, 316-grade stainless may be appropriate. The ball-bearing system runs in formed stainless raceways for a smooth, consistent pull that holds up through repeated cleaning cycles.
Specify the ESR-3813 in 14 inch drawer applications where the environment rules out standard plated hardware: commercial kitchen equipment drawers, lab and healthcare casework, food-prep station undercounter storage, boat galley cabinetry, and any pull-out that will be wiped down or hosed regularly. The 14 inch length suits shallow base cabinets and compact undercounter storage units. At 84 lb per pair, it covers the typical loads in these applications without over-specifying the hardware. Shops building multiple units will appreciate the non-handed design, which simplifies inventory and eliminates the risk of a mismatched handed pair on the assembly line.
304 stainless resists corrosion far better than zinc-plated steel in most wet environments. For continuous salt-water exposure or harsh outdoor marine service, check whether your application requires 316-grade stainless; the source data for this slide specifies 304.
The hold-in detent is a position catch that keeps the drawer firmly closed and stops it from bouncing back open after being pushed shut. It is not soft-close — there is no damper on this slide. The drawer closes at normal speed and is held by the detent, not slowed by a mechanism.
Yes. Full extension brings the drawer member out approximately the full 14 inch slide length, so the entire drawer interior is accessible at the cabinet face.
The ESR-3813-14 is sold per pair, so one order equips one drawer opening.
No. The ESR-3813 is non-handed, so both slides in the pair are identical and fit either side of the cabinet.
Where plated slides are a recurring maintenance issue, switching to stainless removes the problem at the source — the material itself does not corrode, so the slide keeps running cleanly through the same washdowns, humidity, and handling that wore out the last set.
Sold In: 1 Pair