Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune 8 inch full extension drawer slides are side mount, ball bearing drawer slides that provide full extension so the drawer can travel its entire length for access to stored contents. These Sugatsune America slides are built as a side mount drawer slide, giving a familiar layout for cabinet and casework construction. The ESR-3813-8 model uses ball bearing action, which supports smoother movement under load compared to friction slides, improving drawer operation in frequent-use applications. A positive stop feature is built into the slide, which limits travel at the end of stroke and helps protect the slide and cabinet from over-travel impacts. The hold-in detent design keeps the drawer in the closed position until pulled, which helps keep drawers from drifting open in normal use. This slide is non-handed, so the same part works on either side, reducing part variety to track on the job.
The ESR-3813-8 slide mounts as a side mount unit, so the cabinet member fastens along the cabinet side panel while the drawer member attaches to the drawer side, aligning with standard joinery layouts. Full extension construction means the slide must be positioned to allow the moving members to travel completely, so the drawer front can clear the cabinet face for full access. Mounting holes on the slide are sized to accept M4 or #8 binding, pan, or truss head screws, which gives flexibility to select head styles that sit properly in the slide profile and support firm clamping against wood or composite sides. The combination of side mount orientation and these compatible screw sizes supports consistent, repeatable installations across multiple cabinets in the same project.
The ESR-3813-8 drawer slide is part of Sugatsune Americas ESR-3813 full extension slide line, suited to drawer applications that benefit from full travel. Because it is a side mount, ball bearing slide, it fits cabinet and casework designs where there is room along the cabinet sides to mount the slide members. Full extension operation lets the drawer box move completely forward, so items stored at the back are accessed without reaching into the cabinet, which is useful in deeper drawers. The positive stop built into the slide controls the open limit, which helps keep the drawer from pulling past its intended position in everyday use. The hold-in detent at the closed position works with the cabinet layout to keep drawers seated, which is important in workspaces where drawers are opened and closed repeatedly during the day. Non-handed design means the same ESR-3813-8 slide serves on both left and right, simplifying planning for multi-drawer installations.
The ESR-3813 full extension slide uses ball bearing construction, which supports smoother movement of the slide members as the drawer opens and closes, helping maintain a consistent feel over the drawers travel. Full extension travel allows the moving member to bring the drawer fully forward, improving visibility of contents and reducing time spent searching in the back of the drawer. The positive stop feature limits travel at the open end, which can reduce stress on mounting points when drawers are pulled firmly in busy environments. A hold-in detent at the closed position helps keep the drawer front flush with the cabinet when not in use, which supports a clean front alignment across multiple drawers. Because the slide is specified as non-handed, installers can pull from one inventory location for both sides of the drawer, reducing the risk of using an incorrect hand during assembly and streamlining repetitive installations.
The ESR-3813-8 is a side mount, ball bearing, full extension drawer slide, so it supports full drawer travel and smooth motion along the cabinet sides.
The ESR-3813-8 hold-in detent retains the drawer in the closed position, which helps prevent drawers from drifting open during normal operation.
The ESR-3813-8 is non-handed, so the same slide model can be installed on either the left or right side of the drawer.
The ESR-3813-8 slide is mounted with M4 or #8 binding, pan, or truss head screws, providing several compatible head styles for cabinet materials.
Full extension on the ESR-3813-8 means the drawer can open to its full depth, so items stored at the back are accessible from the front.
The ESR-3813-8 positive stop limits the drawer at its designed open position, helping avoid over-travel that could stress slide members or cabinet sides.
The ESR-3813-8 from Sugatsune America combines full extension travel, ball bearing movement, and a hold-in detent to support practical drawer function in side mount layouts. The non-handed design means one model serves both sides, while the specified M4 or #8 binding, pan, or truss head screws align with common cabinet fastening practices. For projects calling for a side mount drawer slide with controlled travel and a defined closed position, this ESR-3813 full extension slide offers clear installation and operational details suited to repetitive cabinet work.
Sold In: 1 Pair