Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune 24 inch full extension drawer slides provide full extension travel, so the drawer opens the full length and exposes the entire contents for easier access and clear visibility during use. The ESR-6-24 model from Sugatsune America is a side mount ball bearing slide, so it rides on ball bearings along the cabinet side, giving a smoother action than simple friction guides in many shop and cabinet applications. This slide is rated at 108 lb, so it supports medium-duty drawers where a defined load rating is important for project planning and hardware selection. The drawer slide is non-handed, so the same slide can be used on either side of the drawer, which simplifies ordering and cuts shelf complexity in the shop. The product is described as a standard ball bearing drawer slide, which positions it well for typical cabinet, furniture, and storage applications that call for a familiar and proven slide format.
The ESR-6-24 drawer slide mounts with M4 or #8 binding, pan, or truss head screws, so installers can choose from several common screw styles that match their preferred fastening approach. The ability to use either metric M4 or standard #8 screws offers flexibility in different shop environments or when projects follow a specific fastener standard. The head styles called out - binding, pan, or truss - all present a broad bearing surface against the slide, which supports secure attachment to the drawer and cabinet members. The slide is specified as side mount, so it aligns along the vertical cabinet sides, fitting the construction patterns used in many frameless and face-frame cabinet layouts.
The ESR-6-24 from Sugatsune America is classified under side mount, ball bearing slides, so it is intended to run along the cabinet sides with ball bearings carrying the drawer load for smoother motion under weight. Being part of a drawer slides and related hardware category keeps this model aligned with typical applications like kitchen cabinets, shop drawers, and furniture pieces where consistent extension and controlled movement are needed. The full extension design lets the back of a 24 inch drawer move fully outside the cabinet opening, so access to tools, hardware, or supplies is not restricted by partial extension. With a 108 lb load figure in the description, the slide suits drawers that carry moderate loads, such as hardware bins or shop supplies, where the load rating guides sizing of drawer contents and cabinet construction.
The unhanded design described for this slide means the same ESR-6-24 part can be used on both left and right sides, which simplifies inventory, reduces the chance of mixing handed parts on the bench, and speeds repetitive cabinet builds. The front disconnect feature allows the drawer member to separate at the front, which can streamline drawer removal for finishing, adjustment, or service tasks after the cabinet is installed. A hold-in detent built into the slide helps the drawer stay at the closed position, supporting a cleaner cabinet face line and reducing unintended drawer creep in everyday operation. The positive stop description shows that the open position is controlled within the slide travel, which supports consistent clearances and helps maintain alignment of adjacent fronts in cabinet banks. Taken together, these attributes give the ESR-6-24 a clear role as a controlled-motion, service-friendly slide for side-mounted drawers in professional woodworking settings.
The ESR-6-24 is a full extension, side mount, standard ball bearing drawer slide, so it supports smooth motion and complete drawer travel in typical cabinet and furniture applications.
The ESR-6-24 slide is described with a 108 lb figure, so it is suited to medium-duty drawers where a defined capacity helps plan drawer size and intended contents.
The Sugatsune ESR-6-24 drawer slide is specified as 24 inches long, so it matches drawers built around a 24 inch slide length for full extension travel.
The ESR-6-24 front disconnect feature lets the drawer member separate at the front, which simplifies removing the drawer for finishing, adjustment, or service work.
The ESR-6-24 drawer slide mounts with M4 or #8 binding, pan, or truss head screws, so it can be fastened using widely available screw types in many shops.
The ESR-6-24 is described as non-handed, so the same slide model works on either side of the drawer, simplifying ordering and installation patterns.
The ESR-6-24 from Sugatsune America combines full extension travel, a 108 lb load figure, and ball bearing side mount construction, so it lines up well with professional cabinet and furniture projects that need dependable drawer motion. Its non-handed design, front disconnect, positive stop, and hold-in detent support efficient shop workflows where removal, alignment, and consistent closing are part of daily work. With mounting called out for M4 or #8 binding, pan, or truss head screws, the slide ties into common fastening choices found in woodworking environments. For builds calling for 24 inch side mount drawer slides, the ESR-6-24 offers a clearly defined option that fits structured, repeatable cabinet production.