Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape & Vogt TT100 is a full-extension, ball-bearing side-mount drawer slide in zinc-finished steel, rated 100 lb per pair and sized at 18 inches for mid-depth cabinet and furniture drawers. It comes bulk-packed for shops and contractors ordering at volume.
An 18 inch slide suits cabinet drawers with 18 inches of interior depth — a common dimension in base cabinets, shop benches, office credenzas, and utility storage furniture. Full extension is the right spec here because it lets a user reach items stored at the back without pulling the drawer box completely out. That matters in kitchen base cabinets where pots and pans stack deep, in shop storage where tools pile up in the rear, and in any file or utility drawer where the back half of the drawer otherwise goes to waste. The 1/2 inch side clearance requirement per side is the standard for this mounting style: build the drawer box 1 inch narrower than the cabinet opening and the slides drop straight in.
Zinc plating over steel is the workhorse finish in this category — not decorative, not a liability. It handles the moisture and temperature swings common in cabinet shops, garages, and utility rooms without the slide becoming a corrosion problem before the cabinet wears out. For interior applications where the slide will spend its life hidden inside a cabinet box, zinc is the practical default: protective, cost-effective, and consistent across a bulk order. This is a standard-motion slide, meaning there is no soft-close damper or self-closing ramp — the drawer stays where you leave it, which is the right behavior for utility and production work where mechanism complexity adds cost without adding value.
Cabinet shops running production lines, millwork operations building office or commercial casework, and contractors sourcing hardware for multi-unit installs all benefit from a reliable 100 lb full-extension slide that arrives in bulk and installs without fuss. The non-handed design means a single SKU covers every drawer position in a run, no left/right sorting required. Homeowners taking on a kitchen or shop renovation who want a slide that outlasts the base-cabinet box will find the same value here — the spec is the same regardless of order size.
Yes. Full extension means the drawer member travels the full slide length, clearing the cabinet face so the entire drawer interior is accessible.
No. This is a standard-motion slide with no damper or self-closing ramp. The drawer stays in whatever position it is left — open or closed.
The slide requires 1/2 inch of clearance per side between the drawer box and the cabinet interior, which is standard for side-mount ball-bearing slides. Build the box 1 inch narrower than the opening.
No. This slide is non-handed, so one SKU covers both sides of every drawer. Order pairs and install without sorting.
Bulk-pack means the slides arrive loose in a carton rather than individually packaged for retail display. It is the format for shops and contractors ordering at trade quantities.
When the job calls for an 18 inch full-extension slide that installs quickly, carries a real load, and arrives in the quantity a production shop actually needs, the TT100 in zinc covers it without complication.
Sold In: 1 Set
