Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune 5302-650 is a 26 inch, full-extension ball-bearing side-mount drawer slide rated 166 lb per pair, finished in zinc for reliable indoor service in shop, utility, and cabinet applications where a clean, functional finish is the right call.
At 166 lb per pair and 26 inches, this slide earns its place in applications that push past standard kitchen-cabinet loads. Shop drawers carrying hand tools, router bits, or measuring equipment benefit from the full extension, which pulls the entire drawer clear of the cabinet so nothing gets buried at the back. Workbench cabinets, storage units in a finishing room, utility cabinets in a commercial woodshop, and built-in storage in a garage or studio are all good fits. The 26 inch length also suits deeper base cabinets — file drawers, pantry roll-outs in a utility room, or institutional casework — wherever a shorter slide would leave the box unsupported or the drawer underextended.
The zinc finish is electroplated over steel, which gives the slide corrosion resistance appropriate for dry, indoor service. It is a functional finish, mostly hidden once the drawer is installed, and it holds up well in shop and cabinet environments where the slides see regular cycling and occasional contact. This is standard-motion hardware — no soft-close, no self-close ramp, no detent — so the drawer stays wherever it is left. That straightforward behavior suits utility and shop drawers where a closing mechanism would add cost and complexity without a clear benefit. For installations where the drawer must stay closed in transit or on an uneven surface, pair this slide with a suitable latch or lock.
Cabinet shops building shop furniture or utility casework will find the 166 lb rating and 26 inch length match the demands of drawers that carry real weight every day. Contractors fitting out a workroom, mudroom, or garage cabinet run get full-extension access and a load rating that won't be the weak point in the build. Designers specifying storage for a commercial woodworking or fabrication environment can call this slide confidently for any drawer that stays indoors and sees dry conditions. It is not the choice for washdown environments, marine applications, or anywhere moisture will be a regular factor — those applications call for a stainless steel slide.
The 166 lb rating is per pair — two slides working together as installed. Plan the drawer load against that number, not double it.
Yes. Full extension means the drawer member travels the full slide length, bringing the back of the drawer to the cabinet face so the entire interior is reachable.
No. The zinc finish on steel protects against incidental moisture in dry indoor settings, but it is not rated for washdown, food-service, or marine use. For those environments, choose a stainless steel slide.
No. This is a standard-motion slide — the drawer rolls freely on its bearings with no closing assist. It stays wherever it is left.
Standard side-mount ball-bearing slides of this type typically require 1/2 inch of clearance per side between the drawer box and the cabinet interior. Confirm the exact clearance with the Sugatsune 5302 series specification sheet before cutting the drawer box.
A 26 inch full-extension slide rated at 166 lb per pair gives shop furniture and utility cabinet builds the load capacity and access they need, in a finish that works without fuss for the life of the installation.
Sold In: 1 Each