Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune 24 inch full extension drawer slides are side mount, ball bearing slides that allow drawers to travel their full length, so the back of the drawer is reachable without overtravel. The full extension action uses ball bearings to support smooth movement, which helps drawers open and close with consistent feel under load. The slides are non-handed, so the same model works on either side of the drawer, simplifying stocking and layout on the bench. The manufacturer identifies this model as 5302-600, giving a clear reference for matching pairs across multiple cabinets. The slides are rated at 177 lbs, so they can support heavier drawer contents within that load, important for tool, parts, or supplies storage. Made from 304 stainless steel, the slide construction resists corrosion in typical shop and cabinet environments, which supports long-term operation where humidity or occasional moisture is present.
These side mount drawer slides are designed to be fixed with M4 or #8 binding, pan, or truss head screws, so installers can match the slide to common screw types already used in cabinet construction. The screw head styles specified work with the slide geometry, helping the screw heads seat properly in the mounting holes without interfering with drawer travel. The side mount format positions the slides on the drawer and cabinet sides, which aligns with standard cabinet layouts where clearances are planned along the vertical walls. By using a clearly defined 24 inch length, layout for cabinet depth and drawer box sizing becomes straightforward, as the hardware length and full extension movement are known values.
The 5302-600 drawer slides from Sugatsune America are suited for drawer applications needing 24 inch full extension travel, such as storage drawers in cabinets, casework, and shop fixtures where reaching the entire drawer depth is important. The 177 lbs load rating supports heavier contents, so these slides fit well in tool, hardware, or supply drawers that carry significant weight within that limit. Their side mount configuration interfaces with common cabinet side construction, which supports straightforward layout in plywood or composite casework. The use of 304 stainless steel provides corrosion resistance, which is useful in environments that may see humidity or occasional spills, helping the slides maintain operation over time. Combined with ball bearing movement, this material and design combination supports repeatable drawer motion across daily open-and-close cycles.
The front disconnect feature allows the drawer member to be separated at the front, which aids in fitting and removal of drawer boxes during finishing or adjustments without disturbing the cabinet member. This disconnect style can streamline workflows where drawers are removed for finishing and later reinstalled in the same hardware position. The positive stop at full extension provides a defined endpoint, which helps prevent unintentionally pulling the drawer beyond its design travel and supports consistent stopping points across multiple drawers. A hold-in detent near the closed position adds a slight resistance that helps keep drawers closed under normal vibration, which can be useful in busy shop or workspace settings. Because the slides are unhanded, installers can pair and mount them without sorting left and right pieces, which saves time and reduces errors when setting up banks of drawers using the same 5302-600 model.
The 5302-600 model is a side mount, ball bearing, full extension drawer slide, which supports smooth, full-length drawer travel in typical cabinet and casework applications.
These drawer slides have a 24 inch length, so they match drawer and cabinet designs built around a 24 inch slide footprint for full extension travel.
The 5302-600 drawer slides are rated at 177 lbs, allowing them to support heavier contents within that rating for storage drawers and shop fixtures.
These slides mount on the drawer sides and cabinet sides and are designed to be fastened with M4 or #8 binding, pan, or truss head screws.
The front disconnect feature allows the drawer member to separate from the cabinet member at the front, which supports easier drawer removal and reinstallation during work.
The hold in detent provides light resistance near the closed position, which helps keep the drawer closed during normal use and movement around the cabinet.
The Sugatsune 24 inch full extension drawer slides bring together ball bearing movement, a 177 lbs load rating, and 304 stainless steel construction for demanding drawer applications. The side mount layout, front disconnect, positive stop, and hold-in detent features support efficient installation and consistent use across cabinet runs. With the unhanded configuration and M4 or #8 screw mounting options, these 5302-600 slides fit smoothly into standard shop workflows. For 24 inch drawers that need full extension and controlled movement, this model offers a clearly defined set of performance characteristics from Sugatsune America.
Sold In: 1 Each