Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Hettich Quadro V6 undermount drawer slide delivers full-extension travel with a built-in push-to-open mechanism, sized for 470mm drawers and configured as the right-hand cabinet member for frameless installations.
Push-to-open undermount slides earn their place in kitchens and bath vanities where handle-less slab fronts are the design goal. With no pull hardware on the face, every drawer opens the same way: press the front and the mechanism ejects the box far enough to grip and slide out. For waste pull-outs, lower drawers opened with full hands, or furniture pieces where a clean uninterrupted face is the priority, this motion eliminates the hardware decision entirely. The Quadro V6's full extension means that once the drawer is open, nothing stays hidden at the back — useful in deep base cabinet drawers where rear contents are otherwise out of reach.
The Quadro V6 is a steel ball-bearing undermount slide with a zinc finish — a functional, corrosion-resistant coating suited to the indoor cabinet environment. The slide accepts drawer sides between 1/2 inch and 5/8 inch thick, giving flexibility across drawer box constructions within that range. As an undermount slide, it sits beneath the drawer box and stays hidden when the drawer is open, keeping the interior presentation clean. This is a concealed runner in the truest sense: no hardware is visible from the sides or face when the drawer is closed or fully extended.
Cabinet shops building frameless kitchens with handle-less fronts will find the Quadro V6 push-to-open a reliable spec for that application. Designers specifying clean-line cabinetry — slab fronts, integrated appliances, handleless bath vanities — can call this slide with confidence that the hardware supports the aesthetic. For contractors installing pre-built frameless cabinet runs, the Quadro V6 is a straightforward undermount with a well-established installation pattern. The push-to-open function is purely mechanical, so there is no power supply, wiring, or drive unit to coordinate on the job site.
You need the matching left-hand Quadro V6 470mm push-to-open cabinet member for the other side, plus the Hettich Quadro locking devices to fasten the drawer box at the front. Locking devices and any rear brackets are Quadro-specific and should come from the same series.
Not on this model. The Quadro V6 push-to-open is a mechanical ejector function; it opens the drawer at a press but does not include a damped soft-close on the return. If soft-close is also needed, look for the Quadro V6 version that combines push-to-open with the Silent System damping — that is a separate product.
This slide is configured for frameless cabinets. Face-frame installations require specific rear support hardware; if your project is face-frame construction, confirm you have the correct Quadro V6 face-frame variant and the matching rear mounting components before ordering.
Yes. Undermount slides require the drawer box to be built to the slide's published specification — nominal length, box width, side thickness, bottom recess, and rear notch. The Quadro V6 accepts sides from 1/2 inch to 5/8 inch thick; consult the Hettich installation documentation for the full box requirements before cutting parts.
The drawer front must be set with the gap specified in the Hettich Quadro V6 installation guide so the press has the travel needed to fire the mechanism. Mounting the front flush to the face frame without that gap will prevent the push-to-open from engaging.
Get the right-hand member on the shelf and the handle-less front working exactly as the design calls for — full extension, clean face, one press to open.
Sold In: 1 Each