Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the LEGRABOX front fixing bracket with expanding dowel (Expando) for K-height drawer sides, finished in Zinc. It attaches the drawer front to the LEGRABOX K-height side profile and delivers the system's built-in front adjustment, letting installers dial in gap and alignment after the drawer is hung.
The front fixing bracket is the connection point between the LEGRABOX side profile and the visible drawer front — it carries both the mechanical load of the front panel and all the fine-tuning adjustments that make gaps consistent across a run of drawers. In production cabinet work, having the front adjustment built into the bracket means installers can hang fronts quickly and correct any variance without reaching for extra tools or shimming behind the panel. The K-height designation matters here: this bracket is sized for K-height LEGRABOX sides (128.5mm tall), and using a bracket matched to the wrong side height will throw the adjusters out of position. Confirm the side height code on your LEGRABOX order before specifying brackets.
The bracket is steel, which is the standard structural material across the LEGRABOX accessory program. The Zinc finish gives the hardware a cool, neutral tone that works well alongside metallic interior hardware and natural wood drawer fronts alike. Blum offers this bracket in several finish options across the LEGRABOX line; Zinc suits installs where a silver-adjacent hardware tone is preferred over matte gray or white. The finish is consistent with the broader Zinc-finish hardware family, so it blends with other Zinc-finish LEGRABOX components on the same project.
Cabinet shops running LEGRABOX K-height drawers through production will go through front fixing brackets in volume — one bracket per side, two per drawer. The Expando expanding-dowel version suits fronts drilled to the system spec, and the non-handed bracket means one part number covers both sides of every drawer. Designers and contractors completing LEGRABOX installations or replacing damaged brackets on existing cabinets should confirm the K-height designation and Expando mounting type match their current setup, since LEGRABOX brackets are not interchangeable across height codes or between Expando and screw-in variants.
The Expando bracket mounts via an expanding dowel pressed into a pre-drilled hole in the drawer front, rather than a through-screw. This gives a clean front face with no visible fastener on the exterior of the door or drawer front.
No. This bracket is sized for K-height sides (128.5mm / 5-1/16 inch). Each LEGRABOX height code requires its own matched bracket; a mismatched bracket will misalign the front adjusters.
Two — one for each side. Because the bracket is non-handed, the same part number serves both the left and right positions on the same drawer.
No. Front fixing brackets are engineered per system and per height code. This bracket is for LEGRABOX K-height only and is not compatible with other Blum platforms.
Ordering the correct height-code bracket up front — Zinc finish, K-height, Expando mount — means the fronts go on straight and stay that way, with no back-and-forth for wrong-height or wrong-mount hardware.
Sold In: 2 Each
