Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is Blum's screw-on rear fixing bracket for LEGRABOX N-height drawer members, finished in Orion Gray Matte. It mounts at the back of the cabinet to anchor the drawer member and keep the system's geometry intact from front to back.
In a LEGRABOX installation the drawer member runs along the cabinet bottom and needs a fixed point at the back wall to stay in position under load. Without a rear bracket seated at the correct height, the drawer member can lift, tip, or shift rearward when the drawer is pulled hard or loaded heavily. This bracket solves that: it screws into the back panel and cradles the rear end of the N-height drawer member so the runner stays parallel to the cabinet floor across the full drawer depth. It is the part that completes the mechanical loop between the front fixing at the drawer face and the rear anchor at the cabinet back.
The bracket body is formed steel in Orion Gray Matte, a color Blum uses across the LEGRABOX platform and the AMBIA-LINE interior organization program. Specifying this finish keeps the rear bracket visually consistent with the drawer sides and any organization inserts when the drawer is open — a detail that matters in open-shelf or handleless kitchen designs where the drawer interior is fully visible. The steel body holds its shape under the bracket's operational load and does not flex away from the back panel under stress.
Cabinet shops building LEGRABOX N-height drawers need this bracket at the back of every cabinet run — one set per drawer. It is also the correct replacement part when an existing rear bracket is damaged or missing from an N-height installation. Designers and homeowners specifying LEGRABOX in Orion Gray Matte kitchens should confirm this bracket is included in the hardware package, since it is a required component and is not always bundled with the drawer side profiles. It is not compatible with other LEGRABOX height classes or with other Blum drawer platforms such as TANDEMBOX or METABOX.
Yes. The set includes both a left-hand and right-hand bracket, covering both rear corners of one drawer.
No. This bracket is sized for N-height drawer members at 66.5mm. Each LEGRABOX height class uses its own rear bracket, and mixing heights will seat the bracket at the wrong elevation.
No. Rear brackets are system-specific. This bracket is made for LEGRABOX N-height and will not fit TANDEMBOX, METABOX, or any other Blum drawer platform.
It is a screw-on bracket that attaches to the rear panel or back wall of the cabinet. No press-fit tools or clip-in adapters are required.
One set per drawer. Each drawer has two rear corners, and this set covers both — one left-hand and one right-hand bracket per drawer.
Pair this Orion Gray Matte rear bracket set with your LEGRABOX N-height drawer members and the drawer assembly is supported at both ends, keeping the system running true from day one.
Sold In: 1 Set