Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the 650mm (26 inch) steel cabinet profile for Blum's TANDEMBOX drawer system, sold as a matched left-and-right pair with integrated BLUMOTION soft-close. It is the cabinet-side runner that mounts inside the cabinet and receives the drawer member, forming one complete running assembly when paired with the corresponding drawer members and front fixings from the TANDEMBOX platform.
In a TANDEMBOX installation the cabinet profile is the fixed half of the running system: it attaches to the cabinet interior at the side wall and stays in place when the drawer is removed. The drawer members ride into it and lock when the box is pushed home. At 26 inches, this profile targets standard North American base cabinets — the nominal length leaves room for the back panel and the required clearance behind the drawer. Full-extension travel means no stored content is hidden behind a partial opening, which matters in kitchen base drawers, shop storage, and utility pulls where reaching the back of the drawer is part of normal use.
The profile is formed steel in a Zinc finish, the workhorse specification across the TANDEMBOX line. BLUMOTION damping is built into the cabinet member itself, so the soft-close function does not depend on a separately ordered or separately adjusted clip. The mechanism adapts to drawer weight automatically within the system's rated range, and the damping engages consistently regardless of how firmly the drawer is pushed closed. Steel construction keeps the profile rigid under load across the full 26 inch span.
Cabinet shops running TANDEMBOX as their production drawer system reach for this profile when building or restocking 26 inch drawer runs. It also suits kitchen designers and installers specifying a standard base-cabinet depth with full access and quiet closing as non-negotiable requirements. Because this is a platform component rather than a standalone slide, it belongs in a TANDEMBOX build from the start — not as a retrofit into an existing non-Blum installation.
No. This cabinet profile is TANDEMBOX-specific. LEGRABOX and MERIVOBOX use their own runner systems and side profiles, which are not interchangeable with TANDEMBOX components even within Blum's lineup.
It is built into this cabinet profile. You do not need a separate BLUMOTION clip or add-on; the damping is integrated into the runner itself.
This pack is the cabinet member pair only. A complete TANDEMBOX drawer also requires the drawer members, TANDEMBOX side profiles (or a complete drawer side set), a back panel, front fixing brackets, and a drawer front. All components must come from the TANDEMBOX platform and match the same nominal length.
This SKU is sold as a left-and-right pair. If only one side needs replacement, you will receive both; the unused profile can be held as a spare.
BLUMOTION adapts to drawer weight within the system's rated load range. Consult Blum's TANDEMBOX load specifications for the weight limits that apply to the 650mm nominal length.
A 26 inch TANDEMBOX build starts with cabinet profiles that match the depth, and this zinc steel pair with integrated BLUMOTION delivers both the full-extension travel and the quiet close that make the finished drawer feel finished.
Sold In: 1 Set