Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Patwin Plastics Econoflex Series 260 tee molding gives you a black edging solution that measures 1-1/4 inch wide, so it covers and finishes exposed panel edges in one continuous pass. The 7/64 inch kerf specification tells you exactly how wide the groove in the panel needs to be, which supports consistent slot cutting and a snug mechanical grip along the length. The 250 ft length supplies a long run of edging from a single product, which helps keep color and profile consistent across multiple tops, shelves, or panels on the same job. As a tee molding from the Econoflex Series 260 line, this profile is designed as an edge treatment, so it caps raw substrate edges to give them a defined black border that visually frames the surface. The black color matches the T-MOLDING BLACK description, so visible edges read as a clean, dark outline once installed.
The 7/64 inch kerf dimension on this Econoflex Series 260 tee molding directs how the slot in the panel should be cut, so installers can match tooling to that width and create a groove that holds the T-shaped stem firmly. Because the molding is 1-1/4 inch wide, it projects evenly over the panel edge, which helps center the visible trim and keeps the face of the molding aligned along straight runs. The 250 ft length allows long, continuous pieces to be run along edges, which reduces the number of joints where alignment could shift. As a tee molding, the profile is intended to lock into the groove along its stem, so once pressed into the 7/64 inch slot it acts as an integrated edge detail.
This Patwin Plastics Econoflex Series 260 black tee molding functions as an edge treatment on panels where a 1-1/4 inch wide profile is appropriate, so it fits applications that call for a slightly wider band of visible trim. The black color described as T-MOLDING BLACK gives panel edges a dark band that can blend with black tops or contrast with lighter surfaces, which is useful when defining worktops, shelving, or casework outlines. The tee molding product class and Econoflex Series 260 designation identify it as a shaped trim specifically for panel edging, so it integrates naturally into woodworking projects that already specify T-slot edge details. With a total length of 250 ft, a single product can service multi-piece runs like banks of cabinets, long counters, or series work, which supports consistent appearance from one unit to the next.
The 7/64 inch kerf requirement on this tee molding directly informs the slot-cutting step, so shop setups can be dialed to that dimension and repeated across all parts for a uniform stem fit. When the groove matches that 7/64 inch spec, the T-shaped portion of the molding engages along the full depth of the cut, which helps the trim seat straight and resist wobble or gaps at the edge. The 1-1/4 inch width then spans the panel thickness with some coverage to either side, so small variances in panel sizing are less likely to show at the face of the trim. Working from a 250 ft length means long edges can be run from a single continuous piece, which reduces the number of start-and-stop points where cuts and joints could introduce visible shifts. Together, the defined kerf and generous length support repeatable installation patterns across multiple panels.
Patwin Plastics Econoflex Series 260 tee molding has a 1-1/4 inch width, so it provides a generous face of black trim that covers the panel edge and presents a consistent visible band.
This tee molding is specified for a 7/64 inch kerf, so the groove cut in the panel should follow that width to give the T-shaped stem a snug, repeatable fit.
The Econoflex Series 260 tee molding is supplied in a 250 ft length, so extended runs or multiple pieces can be edged from the same continuous product for uniform appearance.
This product is identified as T-MOLDING BLACK, so the visible edge appears as a black trim line along the panel perimeter once installed.
The manufacturer part number is 500-260-1.250, so it clearly identifies this specific Econoflex Series 260 black 1-1/4 inch tee molding profile in ordering systems.
This product is classified under tee moldings, so it is intended as a T-shaped edge trim installed into a matching kerf along panel edges.
The Patwin Plastics Econoflex Series 260 black tee molding brings together a 1-1/4 inch width, a defined 7/64 inch kerf, and a 250 ft length, so it aligns well with edge-banded panel work that specifies a T-shaped trim. The T-MOLDING BLACK description confirms the dark finish that many shop drawings call out when they need a black perimeter line. For projects built around tee molding details, this 500-260-1.250 profile from Wurth Baer Supply offers a clearly identified option that supports consistent slot sizing, edge coverage, and color continuity across related pieces.
Sold In: 1 Roll