Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Patwin Plastics Flexelene Series 260 tee molding provides a black edge detail that covers exposed substrate, helping projects in edgebanding and surfacing look finished and consistent across long runs. The molding has a 3/4 inch width that spans typical panel edges, so the visible face can mask minor edge irregularities on cabinetry or casework. A 3/32 inch kerf dimension matches common groove sizes, allowing the stem of the tee to seat into a routed slot for a secure mechanical hold. The 250 ft length supplies enough material for larger production jobs or multiple smaller installations from a single coil, which reduces changeovers between runs. Being part of the Edgebanding & Surfacing tee molding class aligns it with tasks where an applied edge needs a defined profile and color match. The black color supports contrast or coordination with dark laminates or painted surfaces.
The 3/4 inch width of this tee molding defines how far the cap extends over the panel edge, giving installers a clear target when routing edges and planning reveals. When the edge is prepared to match this width, the molding can sit with the face centered and balanced on both sides. The 3/32 inch kerf dimension directs the width of the groove so the tee stem can lock into the slot with consistent pressure along the length. This combination of width and kerf specification helps support straight tracking during installation, which is important when edging longer pieces in a shop or on site. Within the Edgebanding & Surfacing tee molding category, these dimensions give a repeatable reference for matching tools and panel preparation.
This T-MOLDING BLACK is positioned for edgebanding and surfacing applications where a defined edge profile and color band are part of the design. The tee molding format means the stem seats into a groove while the 3/4 inch wide cap forms the visible edge, supporting a finished look on laminated panels, display fixtures, or cabinet runs. The black color works in layouts that pair with dark laminates or painted panels, allowing the edge to either blend with the field or frame it with a strong outline. As a tee molding within the Edgebanding & Surfacing category, it fits workflows that rely on routed grooves and press-fit stems rather than surface-applied tape, which can be helpful when handling curved or contoured edges.
The 3/32 inch kerf specification gives a precise target for routing bits or saw blades, so shops can standardize tooling around this tee molding profile and get consistent fit along multiple panels. When the kerf matches the stem design, the molding can be pressed into the slot with predictable resistance, which helps hold alignment on straight and gently curved runs. The 250 ft length supports repeating the same profile across a series of cabinets or fixtures without changing rolls, aiding color and profile continuity from piece to piece. The 500-260-0.750 manufacturer part number ties the job back to a specific molding within the Flexelene Series 260 line, which matters when matching previous work or documenting materials for future service. As a product of Patwin Plastics, Inc., this tee molding connects to a defined brand and series, giving specifiers a clear way to call out this exact edge treatment in project notes.
Patwin Plastics Flexelene Series 260 tee molding has a 3/4 inch width, so the cap can cover typical panel edges and present a consistent finished band.
This tee molding is specified for a 3/32 inch kerf, which sets the target groove width so the stem seats securely in routed or sawn slots.
The tee molding is supplied as a 250 ft length, allowing longer continuous edging runs or multiple smaller projects from a single coil.
This Patwin Plastics Flexelene Series 260 tee molding is black, supporting dark color schemes in edgebanding and surfacing layouts.
The molding is in the Edgebanding & Surfacing tee moldings category, aligning it with panel edge finishing on cabinets, fixtures, and similar work.
This molding uses manufacturer part number 500-260-0.750, so shops can reference that code to align new orders with existing projects.
Patwin Plastics Flexelene Series 260 tee molding in black combines a 3/4 inch width, 3/32 inch kerf, and 250 ft length to support edge finishing across cabinetry, fixtures, and general edgebanding tasks. When those dimensions and color align with your routed groove and panel design, this 500-260-0.750 tee molding from Wurth Baer Supply can standardize your edge detail across current and future jobs.