
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Formica IdealEdge 3466-RD is a laminate ogee edge molding that gives a finished look on all sides of a laminate top, so a countertop or work surface presents as a continuous surface instead of showing raw core. The Antique Mascarello Radiance finish provides a decorative surface that visually matches Antique Mascarello laminate, which helps carry the pattern and sheen around the edge for a coordinated installation. The molding is part of the IdealEdge line from Formica, so it is purpose-built as a decorative edge rather than a general trim. A 1-1/2 inch height profile lets this molding cover the edge build-up typically used on laminate countertops, which helps conceal substrate transitions. The 144 inch length gives a single run for many standard kitchen or workstation stretches, which reduces joints along the edge.
This Formica Corporation laminate edge molding is supplied in a 144 inch length, so an installer can run long edges of countertops, islands, or desks with fewer field joints, simplifying layout and cutting. The 1-1/2 inch height allows the edge to align with typical laminated build-ups along a deck, so the profile can be set to cover the drop edge while leaving the decorative face fully exposed. The MDF core accepts adhesive along the bonding surface, and the recommended glue is the AFF522 series, which is selected to work with this edge for secure bonding. Because it is suitable for straight, curved, clipped, and 90 degree edges, one profile can be cut and formed to various shapes on a project, supporting consistent detailing around internal and external corners.
This laminate ogee edge molding is specified for use on countertops, islands, desks, and work stations, so it fits directly into kitchen, office, and shop laminate work surfaces. The decorative Antique Mascarello Radiance finish extends the same look used on horizontal laminates to the edge, which helps maintain a single design story from deck to profile on these surfaces. Suitability for straight, curved, clipped, and 90 degree edges means the same molding can wrap island ends, follow gentle front curves, and finish inside or outside corners, which keeps edge geometry consistent from piece to piece. The MDF core with a moisture barrier gives a core structure that is designed to resist incidental moisture reaching the substrate, which supports performance in typical countertop and workstation environments where spills and cleaning occur. At 144 inches long, the piece can span many full-length countertop runs or longer desk fronts, which helps reduce edge seams and keeps visual lines cleaner along work surfaces.
The 1-1/2 inch height profile on this Formica IdealEdge part is sized to cover a standard laminate build-down, which lets installers align the ogee detail to the top while hiding the structural layers beneath, leading to a uniform reveal along the run. The recommended AFF522 series adhesive is specified for this edge, which guides selection of a glue system that is suited to bond its laminate and MDF core to the substrate for consistent adhesion. A moisture barrier in the MDF core works with the laminated surface to limit moisture intrusion into the core during normal use, which helps the edge maintain shape and bond where sinks, appliances, or frequent wipe-downs place moisture near edges. The 10 year limited warranty that covers delamination of the edge signals that the laminate-to-core bond is designed for long-term service when properly applied, which supports confidence when using this molding on multiple installations. Because it is an IdealEdge product from Formica Corporation, this molding is engineered as part of a coordinated laminate surfacing system, which supports repeatable pattern and sheen matching across surfaces and edges on future projects built to the same specification.
Formica IdealEdge 3466-RD is a laminate ogee edge molding with an MDF core, so it functions as a decorative edge detail for laminate countertops and similar work surfaces.
This edge molding is specified for use on countertops, islands, desks, and work stations, so it fits typical laminate work surfaces in kitchens, offices, and shops.
The molding is suitable for straight, curved, clipped, and 90 degree edges, so one profile can wrap long runs, soft curves, and inside or outside corners on the same job.
The edge molding has a 1-1/2 inch profile height, so it can cover common laminate build-ups and hide substrate layers while presenting the decorative ogee shape.
This Formica edge molding is 144 inches long, so many standard countertop or desk runs can be finished with a single piece, reducing joints along the edge.
The recommended glue for this molding is the AFF522 series, which is specified to bond the laminate-faced MDF edge securely to appropriate substrates.
This Formica IdealEdge 3466-RD Antique Mascarello Radiance ogee molding from Wurth Baer Supply provides a 1-1/2 inch high, 144 inch long laminate edge that is suitable for straight, curved, clipped, and 90 degree edges on countertops, islands, desks, and work stations. The MDF core with moisture barrier, the coordinated Antique Mascarello Radiance finish, and the 10 year limited warranty covering delamination of the edge together support a laminate edge solution designed for stable bonding and consistent appearance. Using the recommended AFF522 series adhesive and the long single-piece length, installers can set up runs that minimize seams while coordinating edge and deck finishes across laminate projects.
Sold In: 1 Each