Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 3422-RD Crema Mascarello delivers a laminate edge molding that carries the countertop decor over the edge with a waterfall shape, so installers can give exposed laminate edges a finished, furniture-like appearance on demanding jobs.
This IdealEdge molding uses the Crema Mascarello Radiance finish pattern, allowing the edge to visually match Crema Mascarello tops and maintain pattern flow along the edge, which helps projects look consistent from deck to profile in kitchens, offices, or commercial areas.
The molding is a 1-1/2 inch high profile, so it is sized to cover typical laminate build-ups while presenting a substantial edge detail that hides core layers, which matters where exposed plywood lines or substrate transitions would otherwise show.
Each length measures 144 inches, giving a continuous 12 foot run that lets installers span long countertops, islands, or work stations with a single piece, helping reduce seams along the edge that can distract from the Radiance finish.
The product is classified by Formica Corporation as IdealEdge laminate edge molding for countertops, islands, desks, and work stations, so it suits a wide mix of horizontal surfaces where a decorative, curved edge profile is preferred over a square-cut band.
Formica IdealEdge uses a moisture barrier with an MDF core, adding protection at the edge against routine moisture exposure while keeping machining and bonding behavior consistent for fabrication shops working with laminate assemblies day after day.
This Formica IdealEdge laminate edge molding is designed for use on countertops, islands, desks, and work stations, so it fits directly into standard laminate fabrication processes where an MDF-based edge is glued to a substrate and then trimmed to final size.
The product is suitable for straight, curved, clipped, and 90 degree edges, which allows a single profile to handle multiple layout conditions on the same job, from long straight runs to inside corners and soft-radius outside corners.
The 1-1/2 inch high profile gives installers material to align with the laminate deck and slightly overhang, so it can be trimmed and flushed for a clean joint along both the top and underside of the edge.
Formica lists a recommended glue from the AFF522 series (sold separately), which means the edge is engineered to work with contact adhesives common in laminate shops, supporting bond consistency under typical shop press or on-site rolling methods.
The MDF core and moisture barrier construction respond predictably to cutting, routing, and sanding operations used in laminate edge work, allowing fabricators to run standard tooling sequences when shaping or easing the edge after bonding.
This IdealEdge laminate edge molding from Formica Corporation is specified for use on countertops, islands, desks, and work stations, so it fits residential kitchens, commercial break areas, office worktops, and shop counters that rely on laminate surfaces.
The Crema Mascarello Radiance finish aligns with Crema Mascarello laminate designs, allowing fabricators to carry that decor over the edge on long islands or reception counters where the front edge is a dominant visual line.
The product falls under the category of laminate edge moldings and decorative edge moldings, which positions it as a finishing component in laminate assemblies where the appearance and feel of the front edge are as critical as the horizontal surface.
The ability to handle straight, curved, clipped, and 90 degree edges means a single 144 inch length can be planned across multiple segments of a run, such as a main counter, a clipped corner, and a short return leg, reducing the variety of profiles on the job.
The 12 foot length is especially useful on islands and large desks where fewer joints in the edge help maintain pattern continuity and make the waterfall profile read as one continuous shape along the user-facing side.
The moisture barrier paired with the MDF core supports edge use in work areas where occasional spills, drinks, or cleaning fluids may contact the front edge, while still working within the fabrication methods shops use for MDF-based trim.
The 1-1/2 inch profile height on Formica IdealEdge 3422-RD Crema Mascarello gives installers a defined dimension to reference when cutting substrates and planning build-ups, which helps repeat edge reveals across multiple tops in the same project.
The Radiance finish treatment on the Crema Mascarello decor adds visual depth that carries over the waterfall curve, so the edge reads as an intentional design feature rather than a simple protective strip along the front of the counter.
Using the AFF522 series recommended glue (sold separately) ties the edge molding to known adhesive performance on laminate work, supporting bond integrity along the full 144 inch length under day-to-day use conditions on busy surfaces.
The MDF core behind the decorative laminate skin cuts and routs like other MDF components in a shop, allowing fabricators to use existing bits and cutters to shape inside and outside corners, which supports consistent profiles from one job to the next.
The moisture barrier in the construction adds a layer of protection at the edge, helping the laminate edge molding resist typical moisture exposure along the front of sinks, beverage stations, or workstations where liquids contact the edge.
This product carries a 10 year limited warranty that covers delamination of the edge, so shops and installers can rely on the edge bond performance described by Formica over a defined period when the molding is used in appropriate laminate applications.
Formica IdealEdge 3422-RD Crema Mascarello is a 1-1/2 inch high laminate edge molding in a 144 inch length, giving installers a 12 foot run for long countertop or island edges.
This IdealEdge molding is for use on countertops, islands, desks, and work stations, so it suits laminate work surfaces in kitchens, offices, and commercial projects needing a decorative waterfall edge.
Formica IdealEdge 3422-RD Crema Mascarello is suitable for straight, curved, clipped, and 90 degree edges, allowing one profile to treat mixed edge conditions along a laminate run.
This Formica IdealEdge laminate edge molding uses an MDF core with a moisture barrier, combining familiar machining behavior with edge protection in typical countertop environments.
Formica recommends glue from the AFF522 series (sold separately) for this IdealEdge molding, aligning the product with contact adhesive systems used in laminate fabrication shops.
This Formica IdealEdge Crema Mascarello profile carries a 10 year limited warranty that covers delamination of the edge, providing defined coverage for the bonded edge assembly.
Choose Formica IdealEdge 3422-RD Crema Mascarello when a 1-1/2 inch high, 144 inch long laminate edge molding is needed to finish countertops, islands, desks, or work stations with a Crema Mascarello Radiance finish waterfall profile.
The moisture barrier MDF core, suitability for straight, curved, clipped, and 90 degree edges, and the 10 year limited warranty covering edge delamination align this molding with trade-focused laminate fabrication and installation work.
Using the AFF522 series recommended glue (sold separately) with this Formica laminate edge molding lets shops keep to established adhesive systems while delivering a coordinated IdealEdge finish across demanding projects.
Sold In: 1 Each