Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 3547-RD Lapidus Brown Radiance Finish Double Radius Edge Molding provides a decorative, finished edge treatment using a laminate edge molding profile. The 1-1/2 inch height pairs with laminate surfaces to visually cap the substrate, so the build looks intentional instead of raw. The Lapidus Brown Radiance finish matches corresponding Formica decor, keeping color and pattern continuous around the countertop or work surface. The double radius shape softens both exposed edges, which helps reduce sharp transitions on islands, desks, and work stations. This molding is manufactured with a moisture barrier MDF core, so the edge construction is designed to resist moisture intrusion at vulnerable edges. The 12 foot length allows long, uninterrupted runs across countertops or work stations, which reduces joints and simplifies layout planning.
This laminate edge molding is suitable for straight, curved, clipped, and 90 degree edges, so one profile can address most edge layouts on countertops, islands, desks, and work stations. The design works with a moisture barrier MDF core, so standard laminate fabrication tools and techniques can be applied to trim and fit the molding. Recommended glue, sold separately, is the AFF522 series, so adhesive selection aligns with the manufacturers guidance for bonding this edge profile. The 12 foot length supports full runs along common counter spans, so cutting and fitting can be organized to minimize waste while maintaining grain and pattern flow at corners and transitions.
IdealEdge brand edge molding from Formica gives a finished look on all sides, so it is suited to exposed installations where the user sees and touches the edge frequently. It is specified for use on countertops, islands, desks, and work stations, so it fits both residential and commercial laminate work surface layouts. The Lapidus Brown Radiance finish coordinates with Formica surfaces carrying the same decor, so designers can extend the pattern over the edge rather than stopping at the top. Suitability for straight, curved, clipped, and 90 degree edges means a single molding type can follow most plan shapes, so fabricators can carry one consistent profile around corners and along radius sections. This supports cohesive appearance when multiple surfaces meet or wrap.
The 1-1/2 inch height gives a defined dimension to set up tooling and alignment, so repeat cuts and fits can be planned along the length of the 12 foot section. The double radius edge design creates two rounded faces, so routing or trimming focuses on blending the laminate surfaces rather than shaping a square edge from scratch. The moisture barrier MDF core supports machining and bonding while resisting moisture ingress at the edge, so the bond line and substrate remain protected in typical countertop and work station environments. Recommended AFF522 series glue, sold separately, is identified for this molding, so adhesive selection stays consistent across jobs and supports repeatable bond performance. The 10 year limited warranty covering delamination of the edge underscores the product intent for long-term edge stability when properly fabricated into laminate assemblies.
Formica IdealEdge 3547-RD Double Radius Edge Molding is 1-1/2 inches high and 12 feet long, so it can cover standard countertop edges while spanning long runs with fewer seams.
This molding is designed for use on countertops, islands, desks, and work stations, so it fits projects where a decorative laminate edge is exposed to view and regular contact.
The IdealEdge Lapidus Brown molding is suitable for straight, curved, clipped, and 90 degree edges, so one profile can run along most plan shapes in a countertop layout.
This edge molding uses a moisture barrier MDF core, so it is built to resist moisture at the edge area and support durable performance in typical countertop environments.
The recommended glue, sold separately, is the AFF522 series, so adhesive choice is aligned with the product design for bonding this Formica laminate edge molding.
This Formica IdealEdge molding has a 10 year limited warranty that covers delamination of the edge, so the laminated bond is backed for long-term use in normal applications.
The Formica IdealEdge 3547-RD Lapidus Brown Radiance Finish Double Radius Edge Molding offers a 1-1/2 inch high, 12 foot long laminate edge solution for countertops, islands, desks, and work stations. Suitability for straight, curved, clipped, and 90 degree edges, together with a moisture barrier MDF core and a recommended AFF522 series adhesive, supports consistent fabrication and long-term edge performance. For projects calling for a matching Lapidus Brown Radiance edge with a double radius profile, this molding provides a defined, warrantied option that aligns with Formica laminate surface designs.
Sold In: 1 Each
