Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 3547-RD Lapidus Brown Radiance finish ogee edge molding provides a decorative laminate edge profile that finishes exposed sides on countertops, islands, desks, and work stations in one continuous piece. The 1-1/2 inch height works with many laminate build-ups, so the edge can cover the substrate and laminate together for a clean visual transition. The Lapidus Brown Radiance finish matches the coordinating Formica surface pattern, which helps keep color and pattern consistent from top surface through the edge detail. This molding belongs to Formica's IdealEdge family, so it is designed as a decorative alternative to standard square laminate edges for upgraded projects. As a laminate edge molding, it gives fabricators a way to finish straight, curved, clipped, and 90 degree edges with the same profile, which keeps layouts and templates consistent across a job.
This Formica IdealEdge Lapidus Brown ogee edge molding is designed for bonding to the edge of countertops, islands, desks, and work stations where a decorative laminate edge is needed. The laminate edge molding works with straight edges, curved sections, clipped corners, and 90 degree edges, so installers can plan one continuous profile around a top. Formica recommends AFF522 series glue, sold separately, as the adhesive, aligning the edge molding to typical laminate bonding workflows used in shops. The MDF core under the laminate gives a stable base during cutting, routing, or trimming, which helps maintain the ogee shape when flush trimming to the deck surface. The 12 foot length means fewer joints to glue and dress, which can streamline fabrication steps when running long edges on commercial or residential tops.
This Formica IdealEdge 3547-RD Lapidus Brown Radiance finish ogee edge molding fits projects using matching Lapidus Brown laminate on countertops, islands, desks, and work stations where the goal is a continuous decorative edge. The 1-1/2 inch profile height suits many typical laminate constructions, allowing the edge to span from underside substrate to the top laminate layer on built-up edges. Because the profile is rated for straight, curved, clipped, and 90 degree edges, fabricators can design tops with inside corners, outside corners, and soft curves and keep the same edge molding throughout. The moisture barrier construction supports use in kitchen, office, and similar environments where tops are exposed to liquids during daily use. The 12 foot length lets shops run long island edges or conference tops without frequent seams along the edge profile.
The matched Lapidus Brown Radiance finish on this IdealEdge molding reduces color and pattern mismatch between the top and the edge, which cuts down on adjustments during layout to hide transitions. The MDF core delivers a uniform material under the laminate, so routing and trimming can be dialed in once and repeated, improving consistency across multiple parts. Because the profile is designed for straight, curved, clipped, and 90 degree edges, templates and jigs for that ogee shape can be reused around corners and arcs instead of changing profiles mid-run. The 1-1/2 inch height gives coverage for many laminate build-ups, which limits additional steps to mask substrate lines at the edge. Using the recommended AFF522 series adhesive keeps the bonding method aligned with Formica guidance, helping the edge stay tight over time. The 10 year limited warranty covering delamination of the edge indicates the molding is engineered to stay bonded under normal service conditions.
This Formica IdealEdge 3547-RD molding is 144 inches, or 12 feet long, allowing installers to cover long countertop, island, or desk edges in a single continuous piece.
The Lapidus Brown Radiance finish ogee edge molding has a 1-1/2 inch height, so it can span common laminate build-ups from the underside substrate to the top laminate layer.
This IdealEdge laminate edge molding is suitable for straight, curved, clipped, and 90 degree edges, supporting continuous decorative profiles around many top layouts.
This Formica IdealEdge molding uses an MDF core, providing a consistent backing for the laminate layer during cutting, routing, and trimming operations in the shop.
Formica recommends AFF522 series glue, sold separately, for bonding this IdealEdge molding, aligning with typical laminate adhesive systems used by fabricators.
This IdealEdge Lapidus Brown ogee edge molding carries a 10 year limited warranty that covers delamination of the edge under the stated warranty terms.
The Formica IdealEdge 3547-RD Lapidus Brown Radiance finish ogee edge molding gives fabricators a laminate edge solution matched to Lapidus Brown tops on countertops, islands, desks, and work stations. The 1-1/2 inch profile height, MDF core, and moisture barrier construction support everyday use where liquids and cleaning routines are common. With a 12 foot length and suitability for straight, curved, clipped, and 90 degree edges, one profile can handle most edge runs on a project. Pairing it with the recommended AFF522 series adhesive keeps the workflow aligned with Formica guidance. For projects built around Lapidus Brown laminate, this IdealEdge molding provides a coordinated decorative edge ready for shop fabrication and field installation.
Sold In: 1 Each