Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 9483-11 edge molding gives you a double radius laminate edge solution in the Ferro Grafite 9483-11 design, so countertop or panel runs can carry a consistent decorative edge that matches the chosen surface pattern across long lengths.
This edge molding has a stated height of 1-1/2 inches and a length of 144 inches, which covers longer edges in a single piece and supports cleaner visual lines on cabinets, counters, or other laminate-clad components.
The product is identified as a laminate edge molding in the Edgebanding & Surfacing category, so it is intended to finish exposed laminate edges rather than core structural elements.
The Satin Touch finish called out in the description ties the edge appearance and feel to Formica Corporation surfaces using the same finish, which helps maintain a unified look where panel faces and edges meet on a project.
This Formica IdealEdge laminate edge molding is designed as a decorative edge solution in the Laminate Edge Moldings product class, so it is used where a laminate-clad substrate needs a shaped finished edge rather than a square raw core.
The 1-1/2 inch height provides a clear reference dimension when planning edge build-ups, because it indicates how much vertical face can be covered from top surface down the edge on a typical laminated countertop or panel.
The 144 inch length supports installation on longer edges with fewer seams, which matters when installers want a continuous decorative line along front edges or exposed panel sides without breaking the profile multiple times.
The double radius profile directs how the molding will present once installed, adding a softened contour to the exposed top and bottom instead of a flat or single-radius face, which affects both appearance and how the edge meets adjacent surfaces.
This Formica IdealEdge Ferro Grafite Satin Touch edge molding suits applications where a laminate edge needs to visually coordinate with Formica decorative laminate in the 9483-11 Ferro Grafite design, such as counters, tabletops, or casework edges in that pattern.
The product sits within the Edgebanding & Surfacing category and the Decorative Edge Moldings classification, which positions it specifically for finishing exposed laminate edges rather than acting as a structural trim or framing piece in carpentry assemblies.
The 1-1/2 inch height helps it interface with typical laminate-on-substrate constructions, because that dimension provides enough coverage down the edge for many standard countertop build-ups using laminate over a core material in common thicknesses.
The Satin Touch finish reference in the product name signals that it is intended to align with Formica surfaces finished in Satin Touch, so designers and installers can extend that specific finish from the main surface down through the edge treatment.
The Ferro Grafite 9483-11 identification in the name and description provides a direct pattern reference, letting the edge molding follow the same decor as matching laminate sheets in that color and design on surrounding horizontal or vertical surfaces.
This laminate edge molding uses a double radius profile, so once mounted along an edge it presents curved transitions on the exposed sides, which helps create a softer visual line and a defined decorative shape at the front of tops or panels.
The 144 inch length is significant for workflow because it allows long runs, such as many full-length countertops, to be handled with a single continuous piece, and this limits joint layout decisions along the edge profile during fabrication.
The naming of the product as Formica IdealEdge and its placement in Laminate Edge Moldings indicate it is engineered for laminate surfacing systems, which helps fabricators keep edge components within the same manufacturer family as the sheet goods they specify.
The manufacturer part number 094832011E12000 and the SAP description IDEAL EDGE FERRO GRAFITE DBL RAD give clear identifiers when reordering or matching documentation, which helps shops maintain consistency across multiple batches on repeating jobs.
The decorative classification under Edgebanding & Surfacing means its role is to finish and protect visible laminate edges, which is important where clients expect the edge detail to match the design intent of the selected Formica Corporation surface material.
Formica IdealEdge 9483-11 is a laminate edge molding classified as a Decorative Edge Molding in the Edgebanding & Surfacing category, so it is intended to finish exposed laminate edges.
The edge molding is listed at 1-1/2 inches high and 144 inches long, which allows it to cover typical laminate edge build-ups along extended runs in one continuous piece.
The double radius design gives the molding a curved profile on two sides, creating a shaped decorative transition at the edge instead of a square or single-radius corner.
This molding uses the Satin Touch finish, which aligns its surface appearance and feel with Formica Corporation laminate products specified in the same Satin Touch finish family.
Ferro Grafite 9483-11 refers to a specific Formica design number, so this edge molding visually coordinates with Formica laminate surfaces using the Ferro Grafite 9483-11 decor.
The product is identified by manufacturer part number 094832011E12000 and the SAP description IDEAL EDGE FERRO GRAFITE DBL RAD, supporting consistent selection across projects.
Choose this Formica Corporation IdealEdge Ferro Grafite Satin Touch double radius laminate edge molding when a 1-1/2 inch high, 144 inch long decorative edge is required to match the Formica 9483-11 Ferro Grafite design on laminate-clad surfaces.
Sold In: 1 Each
