
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
PVC edgebanding 1mm 15/16 x 328 describes a Doellken Woodtape PVC edge banding roll that covers and protects exposed panel edges, so cabinet and furniture projects have a finished, uniform appearance around all visible sides. The 1mm thick construction gives the edge a solid feel, which supports everyday use on doors, drawer fronts, and shelves without leaving a flimsy edge profile. The 15/16 inch width works with common 3/4 inch panels, giving a bit of trim excess that can be flushed after bonding for a tight, straight line. The 328 foot roll length supports production runs or multiple jobs from a single coil, reducing roll changes during workflow. The 2422 gray color matches gray laminate or painted surfaces specified to that tone, which helps maintain color consistency across doors, edges, and panels in the same installation.
The 1mm thick profile on this PVC edgebanding provides enough material for standard trimming methods, so manual or machine trimming operations can produce a smooth, even edge without cutting through to the panel core. The 15/16 inch width allows installers to center the tape over typical 3/4 inch substrates, then remove the small excess along both faces for a precise finished edge. The 328 foot roll format supports feeding through common edgebanding equipment or manual application setups, giving a continuous supply for casework runs. Because the product is PVC, it pairs with established PVC-compatible edge bonding processes, so shops can integrate this roll into existing workflows focused on similar PVC edge materials.
This PVC edgebanding, color 2422 gray, is suited for projects that specify a gray finish across cabinet or furniture components, so visible edges align with doors, drawer fronts, and end panels using the same tone. The 15/16 inch by 1mm format supports edging on cabinet boxes, shelving, and panel work where a slightly oversized tape is preferred to allow trimming for a straight, finished edge. The 328 foot roll length fits production cabinet shops that run multiple boxes or full room layouts in one color, keeping the same color 2422 gray across all exposed panel edges. The Doellken Woodtape branding ties this product into a recognized line of edge banding, which supports repeat use on jobs that call out the same manufacturer part number 2422-1540-1 in drawings or cut lists.
The 1mm thickness on this PVC edge banding gives installers a stable profile during bonding and trimming, which helps reduce edge deformation and supports straight, chip-free cuts along the edge. The 15/16 inch width offers working room on each side of a standard panel, so flush trimming can remove minimal waste while still protecting the corners of the core material. The 328 foot roll configuration streamlines setup on edge banders that favor longer runs, reducing changeover and helping maintain a uniform gray edge appearance across an entire kitchen or office suite. The specific 2422 gray color identification lets project teams align this roll with matching surfaces in planning documents or material schedules, reinforcing visual continuity from edge to field surface in finished work.
The PVC edgebanding is 15/16 inch wide, 1mm thick, and supplied in a 328 foot roll, so it covers many panel edges in a single color 2422 gray run.
The 2422 gray designation identifies the specific gray tone of this Doellken Woodtape PVC edgebanding, helping match edge color to coordinating gray panels or surfaces in the same project.
The 1mm thickness provides a solid PVC edge profile that supports trimming and daily use on cabinet and furniture panels without leaving a fragile or overly thin edge line.
The 15/16 inch width gives slight overhang on typical panel thicknesses, allowing installers to trim back to a flush, clean edge while fully covering the exposed core material.
The 328 foot roll length supports continuous edgebanding runs on multiple cabinets or panels, reducing coil changes and helping maintain consistent gray edges across a project.
The manufacturer part number is 2422-1540-1, providing a clear reference for drawings, material lists, and reorders when this exact 2422 gray PVC edgebanding is required.
This Doellken Woodtape PVC edgebanding in color 2422 gray, 1mm thick and 15/16 inch wide on a 328 foot roll, supports cabinet and furniture work that specifies a consistent gray edge finish. The combination of defined dimensions, gray color reference, and manufacturer part number 2422-1540-1 helps align shop ordering with design documents. For projects built around gray panel surfaces needing durable, finished edges, this edge banding roll from Wurth Baer Supply fits directly into panel edging workflows.
Sold In: 300 Lineal Ft