
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Framatech PVC edgebanding provides a Buff Elm PVC edge treatment designed for fabricators who need a coordinated edge on laminate or panel work. This edgebanding is part of the Edgebanding & Surfacing category, so it supports jobs where exposed board edges must match the chosen decorative surface for a consistent finished appearance on cabinets, fixtures, or furniture components.
The 15/16 inch width gives coverage for standard panel thickness with a slight overhang, which allows trimming back to a clean, flush edge on casework or shelving. The 3mm thickness creates a substantial edge profile compared to thin tape-style banding, which helps achieve a more solid, furniture-like edge on high-visibility fronts.
The Buff Elm designation identifies the color and pattern family tied to the FO 5793-NG Buff Elm description, which helps align this strip with panels or laminate in the same visual series. The Framatech brand identity signals that this is a dedicated edge banding solution, supporting repeatable results across multiple jobs using the same scheme.
The 15/16 inch width on this Framatech 15/16 x 3mm edgebanding gives fabricators extra material beyond common panel thickness, which supports clean trimming operations and reduces edge exposure from slight panel variations. The 3mm thickness provides a noticeable edge depth, which is useful when a project calls for a more pronounced banded profile rather than a minimal edge line.
As a PVC edgebanding product, this edge banding integrates into standard edgebanding workflows using equipment set up for PVC strips, supporting consistent feed and trimming routines. The F5793-NG-15/16-3MM identifier ties width, thickness, and Buff Elm color into a single code, which simplifies matching this material to shop drawings, cut lists, and panel layout notes on recurring jobs.
The Framatech Buff Elm edge banding fits projects that specify a Buff Elm visual scheme, because the FO 5793-NG Buff Elm 15/16 x 3MM description directly connects the color and size for coordinated edges. In cabinet shops producing casework with Buff Elm panels, this PVC edgebanding can be applied to shelf edges, cabinet sides, and door or drawer components to maintain a unified appearance from face to edge.
For millwork and fixture work using engineered board, the 15/16 inch width works with typical nominal panels, giving enough overhang for trimming while still aligning closely with finished thickness. This helps maintain straight sightlines along long runs of edging, reducing visual breaks between panels. Because this strip sits within the Edgebanding, PVC product class, it slots into workflows already configured around PVC material, supporting line consistency in shops using edgebanders tuned for similar stock.
On furniture components, the 3mm thickness creates a defined edge that pairs well with contemporary panel-based designs, allowing designers to call out an edge detail that still reads as part of the Buff Elm program. The alignment between the Buff Elm naming and the F5793-NG-15/16-3MM part reference simplifies communication between design, purchasing, and production when specifying the exact edging needed.
The 15/16 inch dimension on this Framatech PVC edgebanding creates a consistent starting point for automated or manual trimming setups, because the width stays tied to a clear numeric spec that matches the SAP description. When equipment is dialed in around this width, operators can repeat edge passes across multiple parts without reconfiguring for each job that uses the same material.
The 3mm thickness provides uniform edge depth from part to part, which helps maintain consistent reveals and edge shadows on cabinet runs and built-ins that share Buff Elm surfaces. This uniformity matters when multiple components meet at corners or inside cabinet openings, keeping the edge profile predictable wherever the banding appears.
The F5793-NG-15/16-3MM manufacturer part number links the Buff Elm color, 15/16 width, and 3mm thickness into one defined product, which supports accurate reordering and reduces the chance of mismatched edge materials in multi-phase projects. By keeping to this single, clearly defined spec, shops can standardize Buff Elm edging across different product lines or job sites while relying on the same PVC edge banding to deliver matching results.
The Framatech Buff Elm PVC edgebanding has a 15/16 inch width, which provides coverage for typical panel thickness with trim allowance for a clean, flush finished edge on cabinet and furniture components.
The F5793-NG-15/16-3MM edge banding is 3mm thick, giving a substantial edge profile that supports a pronounced, furniture-like edge detail on panels using the Buff Elm design scheme.
This Framatech Buff Elm strip is PVC edgebanding, positioning it for interior woodworking projects that rely on PVC edge treatment within standard edgebanding workflows and equipment setups.
The Buff Elm designation and FO 5793-NG description link the edging to a specific color family, helping shops coordinate edge treatment with matching Buff Elm panels or laminate in the same visual program.
The F5793-NG-15/16-3MM part number ties color, width, and thickness together, supporting accurate specification, ordering, and repeat use of the same Buff Elm PVC edgebanding on recurring jobs.
The 3mm thickness provides a deeper, more visible edge, which helps panels present a solid, finished profile on cabinet fronts, shelves, and furniture elements using this Buff Elm edging.
The Framatech 15/16 inch x 3mm Buff Elm PVC edgebanding from Wurth Baer Supply combines a defined width, 3mm thickness, and FO 5793-NG Buff Elm color reference into one repeatable spec, supporting consistent edges across cabinets, fixtures, and furniture projects built around this design.
Sold In: 1 Foot