
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
This Würth #6 x 3/4-inch flat head installation screw is built for mounting European cup hinges and drawer slides into face-frame and frameless cabinet panels. The 3/4-inch length is matched to standard 3/4-inch panel stock, seating the hardware flush without over-penetrating the panel.
At 3/4 inch, this screw is sized specifically for the most common cabinet panel thickness. When driving into a 3/4-inch panel, the screw engages fully through the hardware mounting plate and into the panel substrate without the tip breaking through to the finished interior face. That matters in assembled cabinets where a protruding tip would mark or catch on drawer boxes and shelf contents. Cabinet shops installing European hinges on door stiles and undermount or side-mount slides on panel sides will find this length handles both jobs cleanly.
The #2 square drive recess is designed to hold a correctly sized bit for controlled, cam-out-resistant driving — useful when working inside a cabinet box where repositioning is awkward. The flat head sits flush against the recessed mounting holes in hinge plates and drawer slide brackets. Coarse threads provide the pull-out resistance needed in engineered panel materials like particleboard and MDF, which make up the majority of production cabinet carcasses. The Type 17 auger point cuts cleanly into those materials without requiring a pilot hole in most cases, keeping installation moving.
Cabinet shops running production lines will get the most value from the 20,000-piece box — this is a screw that disappears fast when two hinges per door and four slides per drawer box are the standard. Finish carpenters and installers doing on-site cabinet work benefit from the square drive's bit engagement in tight interior spaces where a slipping bit wastes time and can mar a finished panel. The zinc finish suits the dry, indoor environment these screws are designed for, from shop assembly through final installation.
The 3/4-inch length threads fully into standard 3/4-inch cabinet panel material without the tip emerging on the opposite face. That keeps the inside of assembled cabinets clean and prevents contact with drawer boxes or shelving.
The coarse thread and Type 17 auger point are suited for plywood, particleboard, MDF, and melamine-faced panels — the materials most commonly used in cabinet carcass construction.
Yes. The flat head profile is designed to sit flush in the countersunk holes of European hinge mounting plates and drawer slide brackets, so hardware sits tight against the panel face.
No. The zinc finish is rated for dry indoor use. For wet or exterior environments, a screw with a heavier corrosion-resistant coating would be the right choice.
Each box contains 20,000 screws, making it practical for production cabinet shops that go through hinge and slide hardware in volume.
When the length matches the panel, the drive holds the bit, and the point starts without wandering, hinge and slide installation becomes a background task instead of a slowdown — and that is exactly what this screw is built to do.
Sold In: 1 Each