
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hettich Intermat face frame mounting plate defines the hinge connection point on a face frame cabinet, so the door overlay and hinge alignment match the 4.5mm plate height for consistent door positioning on the run. This hinge mounting plate belongs to the Hettich Intermat family, which keeps component selection aligned when you are standardizing hinge hardware across a project. The plate is identified as a face frame plate, so it is intended for cabinets built with a face frame construction rather than frameless cases. The plate is described for 1/2 inch overlay, so it is suited to layouts where the cabinet door is planned to overlap the face frame by that amount around the opening.
The screw-on mounting style means the plate uses screw fastening into the face frame, which lets you position the plate to match a layout line before tightening for final hinge alignment. The 4.5mm plate height gives you a known setback from the face frame surface, which supports predictable engagement between the door-mounted hinge arm and the plate. The 1/2 inch overlay description connects the plate to overlay-style hinge layouts, so your drilling and layout work can follow a consistent 1/2 inch overlay pattern through the job. The nickel-plated finish marks this as a standard cabinet hardware appearance, which helps keep the hinge area visually consistent with other nickel-finished components inside the cabinet.
This face frame plate is identified for 1/2 inch overlay, so it fits cabinet runs where the door edge is planned to overhang the face frame opening by that amount. The 4.5mm height of the plate sets the hinge attachment plane off the frame, so each hinge arm engages at the same distance from the face frame for a uniform swing across all doors on the run. As a hinge mounting plate in the Hinge Base Plates product class, it forms the fixed reference point on the cabinet side of the hinge system, which stabilizes the relationship between the cabinet frame and the attached door.
The 4.5mm dimension gives you a precise plate height to use in your door and hinge layout calculations, so once you have bored the doors and set reference lines on the face frame, the hinge connection repeats from cabinet to cabinet. Because this part is nickel-plated, it aligns with the nickel-plated description in the web listing, which keeps the exposed parts of the hinge system visually coordinated when the cabinet door is open. The screw-on mounting style defines that you fasten the plate to the face frame with screws, which lets you work directly from a drilling template or layout marks and secure the plate as soon as alignment checks out with your hinge arms. The manufacturer part number 1076539 uniquely identifies this specific 4.5mm, 1/2 inch overlay face frame plate within Hettich offerings, which supports reordering the same plate on future cabinet projects or service calls without re-measuring the existing hardware.
The Hettich Intermat face frame mounting plate is described as a face frame plate, so it is intended for cabinets built with a face frame rather than frameless cabinet sides.
The 4.5mm plate height sets the hinge mounting level off the face frame, which keeps the hinge arm engagement and door position consistent across multiple cabinet doors.
The mounting plate is described as a 1/2 inch overlay face frame plate, so it is suited to cabinet door layouts designed around a 1/2 inch overlay on the face frame.
The screw-on designation means the plate is fastened with screws directly into the face frame, giving a defined attachment method when positioning hinge hardware.
The hinge mounting plate is nickel-plated, which provides a bright, metallic cabinet hardware appearance that aligns with other nickel-plated hinge components.
This mounting plate is identified by Hettich manufacturer part number 1076539, which lets you reference the exact 4.5mm, 1/2 inch overlay face frame plate.
This Hettich Intermat face frame mounting plate from Wurth Baer Supply combines a 4.5mm plate height with a 1/2 inch overlay description, so it fits face frame cabinet runs built on that overlay standard. The nickel-plated finish and screw-on mounting give you a recognizable cabinet hardware look and defined fastening method when tying hinge arms back to the frame. For projects where you want consistent hinge geometry across multiple doors, this dedicated hinge mounting plate provides a repeatable face frame interface that matches the listed Hettich manufacturer part number 1076539.
Sold In: 1 Each