Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DCN2 pin tumbler cam lock for 7/8 material thickness gives you a keyed locking point for doors, drawers, or panels built from 7/8 inch stock, so your layout keeps a consistent material spec without extra blocking or shimming. This DCN N Series pin tumbler cam lock uses Olympus Lock, Inc. keying, tying into the DCN key system so matching keyed groups remain organized on the job. The satin chrome finish on this DCN2-26D-CUST model provides a neutral, professional look that works cleanly with most commercial and residential hardware finishes. The custom keyed configuration on this DCN2 pin tumbler cam lock lets the locking setup align with project-specific key schedules, which matters when you are matching existing DCN N Series lock work. As part of the Olympus Lock cam lock line, this DCN2 unit serves as a compact cylinder solution where you need a rotary lock action in cabinet or fixture construction.
This DCN2-26D-CUST pin tumbler cam lock is specified for 7/8 material thickness, so the cylinder body and cam reach are matched to that panel depth and help the cam land correctly on the strike or frame. Using a cam lock built for 7/8 material thickness keeps the trim ring and face properly seated without the cylinder sitting too deep or too shallow in the panel. The Olympus Lock DCN N Series layout carries a consistent cylinder profile, so cabinet and fixture drilling templates based on DCN N Series geometry stay usable from job to job. Because this model is custom keyed within the DCN N Series, installers can route cylinders according to a master or change key scheme set around the DCN system, helping larger projects keep key control organized.
The DCN N Series pin tumbler cam lock is designed as a cam-style lock, so it suits cabinet doors, drawers, and panels that need a rotating cam to capture a frame or strike. With its 7/8 material thickness specification, this DCN2 unit aligns with casework built from thicker fronts or applied panels, helping the cam sit at the right depth relative to the cabinet body. The satin chrome finish on the DCN2-26D-CUST face works well in commercial millwork, office furniture, and similar installations where satin chrome is already the standard finish for other hardware. Because this Olympus Lock, Inc. cam lock is part of the DCN N Series, it fits projects built around that specific series identity, tying individual cabinets back to a common lock system naming.
The Olympus DCN N Series designation on this pin tumbler cam lock identifies it as part of a specific key and cylinder family, so specifiers can call out DCN N Series across schedules and know the cylinders share the same series base. Using a DCN2-26D-CUST unit on 7/8 material thickness avoids reworking door or drawer fronts, because the cylinder depth and cam throw are designed around that thickness rather than a thinner core. The satin chrome 26D finish on this DCN2 pin tumbler cam lock keeps the cylinder face in line with satin chrome latches, pulls, and hinges, which helps finished work present a unified hardware appearance. The custom keyed configuration in the DCN N Series lets facilities standardize on a DCN system while still assigning different keys or master structures as called out by the key schedule. The cam lock format concentrates security into a small cylinder opening in the panel, helping maintain clean lines on casework while still providing a mechanical lock point that ties into the DCN N Series system.
The DCN2-26D-CUST is a DCN N Series pin tumbler cam lock, so it uses a pin tumbler cylinder with a rotating cam to secure cabinet or fixture components.
The 7/8 material thickness specification means the DCN2 cam lock is sized so the cylinder and cam work correctly in panels built from 7/8 inch stock.
This DCN2-26D-CUST cam lock has a satin chrome 26D finish, giving the visible lock face a neutral metallic look that coordinates with satin chrome hardware.
The DCN N Series designation identifies the lock as part of Olympus Lock's DCN key system, so it aligns with DCN N Series keying across related locks.
The DCN2-26D-CUST model is custom keyed, allowing its pin tumbler configuration to match project-specific keying plans within the DCN N Series system.
A DCN2 pin tumbler cam lock is typically used in cabinet doors, drawers, or panels where a rotating cam is needed to provide a locking point.
The DCN2-26D-CUST pin tumbler cam lock from Olympus Lock, Inc. provides a DCN N Series cylinder sized for 7/8 material thickness, so it pairs well with casework built from that stock. Its satin chrome finish and custom keyed configuration let projects align appearance and key control with an existing DCN N Series plan. For cabinet, fixture, or millwork builds where a cam-style lock and DCN N Series keying are already specified, this DCN2 pin tumbler cam lock offers a targeted choice.
Sold In: 1 Each