Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3M replacement pad medium no hole 4 x 3 is a rectangular foam pad designed specifically for use with a 3x4 inch orbital sander, so it matches that footprint and supports consistent sanding coverage on small, flat panels or edges. The pad uses medium density foam, which provides some conformability for surface sanding and helps the pad follow slight surface variations without collapsing, supporting even pressure across the abrasive sheet. Its 1/2 inch thickness offers support for sanding sheets, giving a firm yet forgiving base that helps maintain cut while reducing harsh gouging on woodworking projects. The pad is built as a non-vacuum design, so there are no dust extraction holes interrupting the face, which keeps full abrasive contact on the work surface where continuous scratch pattern is needed. This pad uses hook and loop attachment, allowing sanding sheets to be applied and removed quickly during step-grit changes.
This rectangular pad is sized for 3x4 inch orbital sanders, so it positions the abrasive sheet over the full backing pad surface with defined edges that track well along rails, frames, and casework parts. The pad uses a 3M Hookit hook and loop attachment, which provides excellent backing support for compatible sanding sheets and allows easy reuse of those sheets between steps, helping reduce abrasive changes during staged sanding. As a non-vacuum pad with no holes, the working face stays solid, so setup involves matching a solid abrasive sheet to the pad face rather than aligning to a dust hole pattern. The 10,000 max OPM rating aligns with common orbital sander motion, allowing the pad to run at typical production speeds in woodworking or similar operations.
This 3M replacement pad is built for 3x4 inch orbital sanders, so it fits applications where a compact rectangular pad is preferred, such as sanding cabinet doors, face frames, drawer fronts, and narrow panels. The medium density foam provides some conformability for surface sanding, which helps the abrasive follow slight thickness variations or edge easing without cutting unevenly, supporting a more uniform scratch pattern on hardwoods or composite panels. Its 1/2 inch thickness offers support for sanding sheets, giving the backing enough depth to stabilize the abrasive during longer passes across rails or panel fields. The non-vacuum, no-hole design makes sense in shops where external dust collection through the pad is not part of the setup, so the full abrasive area contacts the work surface for uninterrupted sanding coverage. Because the pad is intended for industrial and occupational use only, it fits into professional shop workflows where trained operators run orbital sanders continuously on production lines or job shop benches.
The 3M Hookit attachment on this pad provides excellent backing support for sanding sheets, so the hook and loop interface keeps abrasives seated firmly under oscillation while allowing quick sheet removal when a grit change or face inspection is needed. This easy reuse of Hookit sheets can extend disc life by letting the operator swap sheets between tasks without damaging the backing, supporting better abrasive utilization over the life of each sheet. Medium density foam under the Hookit surface gives a balanced feel, firm enough to keep edges from rolling excessively yet compliant enough to help reduce pressure spikes that can leave swirl marks on prepared surfaces. The rectangular 3x4 inch format works well for guiding the pad along straight edges or into corners where larger round pads might overhang too far, improving control around details. Operating at up to 10,000 OPM, the pad is suited to standard orbital sander motion, helping deliver consistent finish quality when used in industrial or occupational environments that rely on repeatable sanding results.
This 3M replacement pad is designed specifically for use with a 3x4 inch orbital sander, so it matches that rectangular footprint during sanding operations.
The medium density foam provides some conformability for surface sanding, helping the pad follow slight surface variations while still backing the abrasive for controlled stock removal and consistent finish.
This pad has a 1/2 inch thickness, which offers support for sanding sheets and helps keep the abrasive face stable during passes over workpieces.
This pad is a non-vacuum, no-hole design, so the sanding face is solid and suited to setups where dust extraction through the pad is not used.
This pad uses a 3M Hookit hook and loop attachment, which provides excellent backing support and allows easy reuse of compatible sanding sheets.
The pad operates at 10,000 max OPM, aligning with typical orbital sander speeds used in industrial and occupational sanding workflows.
This 3M 20433 replacement pad pairs a 3x4 inch orbital sander footprint with medium density, 1/2 inch thick foam, giving a practical balance of support and conformability for surface sanding. The non-vacuum, no-hole design and 3M Hookit attachment provide a solid, hook and loop backed face that supports sanding sheets across their full area. With a 10,000 max OPM rating and an intended focus on industrial and occupational use, it fits into professional sanding stations that rely on consistent, repeatable pad performance.
Sold In: 1 Each