
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
SERVO-DRIVE UNO waste recycle set is a Blum, Inc. solution designed for bottom mount waste and recycle applications, so you can automate pull-out operation on a dedicated bin cabinet. The unit is identified as Blum BPZ10UB00UG50 and manufacturer part 04658019, which helps match this drive kit to documentation and planning layouts. The system uses a power connection with a plug U interface, giving you a straightforward way to tie the drive unit into a nearby outlet without hardwiring. With a power cord length of 1.1 m, you have flexibility to route the cord within the cabinet area while keeping the drive unit positioned at the optimal mounting point. The SERVO-DRIVE uno design is dedicated to a single bottom mount waste or recycle set, which keeps setup focused on one opening and keeps adjustments localized to that cabinet.
This SERVO-DRIVE uno configuration is specified for bottom mount waste and recycle sets, so the drive unit is intended to locate at the cabinet floor where the pull-out assembly runs. The bottom-mount orientation helps keep the force path in line with the waste frame movement, which supports smoother automated opening action. With a plug U power connection and 1.1 m power cord length, the installer can route the cord toward a nearby 110V outlet while keeping slack controlled inside the cabinet structure. The dedicated 110V plug-in power supply with six feet of universal cable provides additional reach from the outlet to the cabinet, which supports planning for retrofits where power is close but not directly adjacent.
The SERVO-DRIVE uno for bottom mount waste/recycle set is built for cabinets that use a floor-mounted waste or recycle frame, so the drive unit can push directly on the moving assembly. In a kitchen or bath layout, this typically means a dedicated waste cabinet next to the sink or prep area, where hands-free or assisted opening improves workflow. Because the system is focused on a single bottom mount opening, it suits installations where one primary waste pull-out needs automation rather than an entire run of drawers. The 1.1 m cord length from the drive unit supports mounting at the optimal bottom position while still reaching toward the back or side of the cabinet for cord management. When combined with the 110V plug-in power supply and its six feet of universal cable, the set supports placement where the cabinet is near an outlet on the wall or in an adjacent bay.
The SERVO-DRIVE uno drive unit is supplied pre-attached, so the installer works with a ready-to-mount assembly rather than a loose mechanism, which saves bench time and reduces alignment guesswork. The double mount bottom bracket pairs with the drive unit for floor mounting, and the use of #6 x 1 inch wood screws gives a known fastener size that fits standard cabinet floor materials. Screw-on distance bumpers using #6 x 5/8 inch wood screws provide defined spacing, which helps align the bin front to the servo stroke for repeatable opening action. The INSERTA connector ties the electrical side of the system together with a dedicated interface, which keeps the connection consistent between the drive unit and power supply. Cable end protectors and cable clips support clean cable routing and strain relief, helping maintain reliable electrical contact during repeated cabinet use. The installation template guides placement of the drive unit and related components, while the instructions and user manual provide step-based references that align with the specified parts.
The SERVO-DRIVE uno waste/recycle set is specified for bottom mount waste and recycle applications, so it suits a cabinet using a floor-mounted bin frame that moves on a slide system.
The 100-240 Volt nominal voltage range means the SERVO-DRIVE uno can operate on common supply voltages, which is useful when projects may use different mains standards.
The 24 V direct current operation keeps the working side of the SERVO-DRIVE uno at low voltage, which supports safer cable routing inside enclosed cabinet spaces.
The IP20 protection category indicates the SERVO-DRIVE uno resists intrusion from larger solid objects, which matches typical dust and debris levels inside cabinet cavities.
The #6 x 1 inch and #6 x 5/8 inch wood screws match common cabinet materials, so mounting the bottom bracket and distance bumpers aligns with standard drilling and fastening practices.
The plug U power connection lets the SERVO-DRIVE uno connect through a 110V plug-in power supply, so the installer can use a standard outlet instead of hardwired power.
The SERVO-DRIVE uno waste/recycle set from Blum, Inc. combines a bottom mount drive unit, defined screw sizes, and a plug U power connection with 100-240 Volt input and 24 V direct current operation, giving you a clear electrical and mechanical specification for a bin cabinet. With IP20 protection, protective insulation, and part number 04658019 tied to a dedicated bottom mount application, this set fits projects where an automated waste pull-out adds value at a single cabinet. Use this configuration when a bottom mounted waste or recycle frame needs powered opening driven by a defined 24 V system fed from a standard 110V outlet.
Sold In: 1 Set