Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood end panel faced GWEPF-3 is a 3 inch wide, 34-1/2 inch high, 23-1/4 inch deep cabinet end panel that finishes the exposed side of a Glenwood base cabinet, so the run ends in a clean, matching side surface. The panel uses 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, which keeps the side stable while presenting a hardwood face that lines up with the Glenwood style. End panels in this construction help maintain squareness along the cabinet depth, so doors and drawers stay aligned relative to the finished side. The Glenwood EPF3 format matches other Kitchen Kompact Glenwood components, which supports consistent appearance when you transition from front frames to side terminations in a run of cabinets.
This Kitchen Kompact Glenwood end panel faced unit is sized at 34-1/2 inches high for use at the exposed side of a base cabinet, so it sits flush with the front frame and toe area when mounted along a 23-1/4 inch deep box. The 3 inch width gives room to fasten along the cabinet edge without overhanging the footprint, which helps keep alignment tight against adjacent cabinets or walls. With a 1/2 inch engineered wood core and hardwood veneers, the panel provides a consistent thickness for fastening, so fastener penetration can be planned to hold securely within the core while leaving the hardwood face ready for finishing to match the run.
The Kitchen Kompact 3 inch W x 34-1/2 inch H x 23-1/4 inch D Glenwood end panel faced GWEPF-3 is designed for base cabinet ends that match Glenwood front frames, so the cabinet side looks finished rather than exposing case material. In a typical layout, this panel runs from the solid wood toe area up to the top of the frame height, carrying the same visual line from front stile to side. Because the end panel depth is 23-1/4 inches, it matches the cabinet box depth and lets you run countertops over a consistent base, which supports accurate scribing and overhang setting along that side. The 3 inch width keeps the end treatment compact, which can be useful when aligning with walls or clearing adjacent openings while still fully covering the cabinet side construction.
The Glenwood EPF3 end panel uses 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, so the side has a balanced build that helps it stay flat along the 23-1/4 inch depth while you fasten it to the cabinet. That engineered core gives consistent holding for fasteners along the 34-1/2 inch height, which is helpful when tying the panel to solid wood hanging strips used at the top and bottom of related Kitchen Kompact wall and base cabinets, because the connection area remains uniform. Hardwood veneers on the faces present a surface that visually aligns with other Kitchen Kompact solid 3/4 inch oak, maple, or beech frames and solid wood toe kicks that are 3/4 inch thick, so the finished end reads as part of the same system. In a full run where frames are built of solid 3/4 inch oak, maple, or beech with kiln-dried rails joined by mortise and tenon and then glued for added strength, this end panel construction helps carry that structural and visual approach through to the side, limiting twist at the termination and supporting long-term door and drawer alignment along the cabinet front.
The Kitchen Kompact Glenwood end panel faced GWEPF-3 suits the exposed side of a 23-1/4 inch deep base cabinet, so the cabinet run terminates with a finished Glenwood-style side.
The 3 inch width and 34-1/2 inch height let the panel finish a base cabinet side without adding extra footprint, while matching standard base height so fronts and sides align cleanly.
The 1/2 inch engineered wood core in this end panel provides a stable fastening base and helps resist warping, which keeps the cabinet side straight over its 23-1/4 inch depth.
Hardwood veneers on the Glenwood EPF3 end panel present a hardwood grain face that visually ties into Kitchen Kompact frames made from solid 3/4 inch oak, maple, or beech.
This Glenwood end panel height aligns with solid wood toe kicks that are 3/4 inch thick, so the toe area and finished side connect in a continuous vertical line at the base cabinet.
The Glenwood EPF3 designation identifies this as a Kitchen Kompact Glenwood end panel faced component, so it is intended to coordinate with other Glenwood series cabinet parts.
The Kitchen Kompact 3 inch W x 34-1/2 inch H x 23-1/4 inch D Glenwood end panel faced GWEPF-3 brings a 3-ply, 1/2 inch engineered wood core with hardwood veneers to the exposed side of your base cabinet, so the run ends with a straight, matching surface. When frames are built of solid 3/4 inch oak, maple, or beech with kiln-dried rails joined by mortise and tenon and then glued for added strength, and solid wood toe kicks are 3/4 inch thick, using this Glenwood EPF3 side component keeps the system visually and structurally consistent from front to end.
Sold In: 1 Each