Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact 30 inch base cabinet refers to this 30 inch wide, 34-1/2 inch high, 24 inch deep Chadwood base cabinet that forms a core lower run in a kitchen layout. The recessed panel design uses oak flat panel doors, so the face style stays consistent with other Chadwood pieces on the same job. Door frames use mortised and tenoned construction of solid 3/4 inch oak, which keeps joints mechanically locked for long-term door alignment under daily opening and closing. Solid wood corner blocks are glued and power nailed, tying the frame together rigidly so the cabinet holds square during installation and over years of loading. Solid wood hanging strips are located on the top and bottom, giving solid grab points when fastening through to wall framing or adjacent cabinets during layout.
On this Kitchen Kompact Chadwood base cabinet, the solid wood hanging strips located on the top and bottom create clear fastening zones for setting the cabinet on a straight, secure run. Solid wood corner blocks that are glued and power nailed keep the cabinet interior square, so when it is pulled tight to walls or neighboring cabinets, the face frame and doors stay in plane. Solid wood toe kicks at 3/4 inch thick provide a strong front edge at floor level, which stands up during shimming and leveling. The plywood drawer system, with its front to back epoxy-coated components securely attached to a solid wood strip in the back, keeps drawer slides supported as the cabinet is anchored, limiting movement that could affect drawer alignment.
The Chadwood 30B base cabinet, identified by manufacturer part number CW30B and described as 2 CHADWOOD 30B, is sized for standard 30 inch base runs at 34-1/2 inch height and 24 inch depth, aligning with typical kitchen counter dimensions. Oak flat panel doors with flat panel plywood inserts match the Chadwood recessed panel style, so this cabinet integrates visually with other Kitchen Kompact Chadwood units in the same room. Adjustable shelves let the interior be configured around sink lines or storage demands, making the same 30 inch footprint work in multiple locations along a run. The plywood drawers, supported by a front to back epoxy-coated drawer system, turn the base into a mixed door-and-drawer storage point that suits utensils, towels, or pantry items directly under the work surface.
Door frames in solid 3/4 inch oak with mortised and tenoned construction hold the doors rigid, so hinge mounting points remain stable and help concealed, self-closing hinges operate smoothly. Concealed, self-closing hinges keep the hardware out of sight while pulling doors closed at the end of travel, which keeps door faces flush and tidy without manual latching. The three-ply flat panel plywood insert with rotary cut red oak veneer face is finished through a 4 step process of stain, sealer, sanding and catalyzed top coat, so the visible oak surfaces and door centers share the same factory-controlled color and sheen. Solid wood corner blocks and solid wood hanging strips contribute to a box that stays square once tied into the run, supporting consistent reveals at doors and drawers. The ball bearing operated nylon roller system on the drawers works with the epoxy-coated drawer components to give repeatable drawer movement that complements the cabinet's clean exterior alignment.
The Kitchen Kompact CW30B base cabinet measures 30 inches wide, 34-1/2 inches high, and 24 inches deep, which aligns with standard kitchen counter height and depth for typical base cabinet installations.
The cabinet uses solid 3/4 inch oak for the mortised and tenoned door frames, and a flat panel plywood insert with a rotary cut red oak veneer face, providing a coordinated oak appearance on the doors.
The doors go through a 4 step process of stain, sealer, sanding and catalyzed top coat, resulting in a prefinished surface with controlled color and a hardened protective layer on the oak.
The concealed, self-closing hinges on the oak flat panel doors keep hardware hidden and pull doors shut at the end of travel, supporting clean lines and consistent door closure during everyday kitchen use.
The plywood drawers use a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back, along with a ball bearing operated nylon roller system, to support stable, smooth drawer travel.
Solid wood corner blocks that are glued and power nailed, plus solid wood hanging strips at the top and bottom, tie the cabinet box together and help it remain square once fastened into a run.
The Kitchen Kompact Chadwood base cabinet in the CW30B 30B size brings together solid 3/4 inch oak door frames, oak flat panel doors, and three-ply plywood inserts with a red oak veneer face, giving a coordinated Chadwood recessed panel look. Structural details such as glued and power nailed solid wood corner blocks and solid wood hanging strips at the top and bottom support a square, stable box during installation and over time. Inside, adjustable shelves and plywood drawers on a front to back epoxy-coated system with a ball bearing operated nylon roller system turn the 30 inch footprint into flexible storage. For projects calling for a 30 inch wide, 34-1/2 inch high, 24 inch deep base in the Kitchen Kompact Chadwood line, this cabinet provides a ready-to-use option.
Sold In: 1 Each