Kitchen Kompact Chadwood base cabinet is a 21 inch wide x 34-1/2 inch high x 24 inch deep cabinet that provides a standard base footprint for kitchen layouts where precise sizing matters. The Chadwood model uses recessed oak flat panel doors, so the face style matches flat panel design runs while keeping a clean, straightforward look across the base row. Door frames use mortised and tenoned construction of solid 3/4 inch oak, creating tight joints at each corner which supports door stability under daily opening and closing. The flat panel plywood insert is a three-ply panel with a rotary cut red oak veneer face, so the door center presents a consistent oak grain field that visually matches the frame. Adjustable shelves give flexibility to set storage height for pots, small appliances, or bulk pantry items inside the base cabinet.
This Chadwood CW21B base cabinet uses oak flat panel doors on the front, tying the face of the cabinet to the same flat panel profile that runs through the Chadwood door style. Adjustable shelves inside the cabinet can be set at different heights, so installers can tune interior space to match the homeowner's cookware or pantry layout. Concealed, self-closing hinges carry the doors, so the hinge hardware stays hidden when doors are shut and the self-closing function pulls the doors to a closed position at the end of travel. The cabinet uses plywood drawers as standard, giving a wood-based drawer box structure that works with the epoxy-coated drawer system running from front to back. That drawer system is securely attached to a solid wood strip in the back of the cabinet, so the runner support ties into solid wood.
The Kitchen Kompact 21 inch base cabinet format creates a fixed-width unit that drops into 21 inch base openings in kitchen layouts. At 34-1/2 inches high, the cabinet height matches common base cabinet standards, supporting typical countertop heights when used in a run. The 24 inch depth aligns with standard kitchen base depth, which positions the door and drawer faces in line with adjacent base units. Oak flat panel doors on the Chadwood CW21B keep the visible front in the Chadwood recessed panel style, so this cabinet integrates visually with other Chadwood units in the same kitchen. Solid wood toe kicks at 3/4 inch thickness on the front of the cabinet support the toe space structure at floor level, which is important where base units line up across a wall.
The mortised and tenoned solid 3/4 inch oak door frames create rigid corners, so doors maintain alignment against the face of the cabinet over time and stay true with the concealed hinge geometry. Concealed, self-closing hinges mean the hinge arms sit inside the cabinet and close the door without external hardware showing, which keeps the front face centered on the recessed panel look instead of exposed hinges. The flat panel plywood insert with rotary cut red oak veneer face provides a stable panel core, so the recessed panel sits properly in the frame while keeping an oak veneer grain that lines up well alongside other doors. Solid wood corner blocks that are glued and power nailed reinforce major joints in the case, which helps the cabinet hold its square shape during handling and once it is fastened in a row. Solid wood hanging strips at the top and bottom of the back give installers continuous solid wood at both upper and lower fastening zones, improving cabinet alignment along stud lines and helping the unit stay tight to the wall.
The Kitchen Kompact Chadwood base cabinet is 21 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits standard base cabinet footprints in many kitchen layouts.
The CW21B door frames are solid 3/4 inch oak with mortised and tenoned construction, giving the doors solid wood strength and tight joints for long-term alignment on the hinges.
The Chadwood base cabinet doors go through a four step process of stain, sealer, sanding, and catalyzed top coat, which creates a sealed oak surface suited to normal kitchen exposure.
The door center is a flat panel plywood insert made from a three-ply panel with a rotary cut red oak veneer face, providing a stable core with an oak veneer appearance.
The Chadwood CW21B uses concealed, self-closing hinges, so the hardware is hidden when the doors are shut and the hinges pull the doors closed at the end of travel.
The base cabinet uses plywood drawers with a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back, supporting smooth drawer movement.
The Chadwood CW21B base cabinet from Kitchen Kompact brings mortised and tenoned solid 3/4 inch oak door frames, a three-ply plywood panel with rotary cut red oak veneer face, and plywood drawers into a 21 inch wide, 34-1/2 inch high, 24 inch deep footprint. Solid wood corner blocks, solid wood hanging strips, solid wood toe kicks, and concealed self-closing hinges work together so the cabinet case, doors, and drawers support normal kitchen use. Use this cabinet when a recessed oak flat panel style and a standard 21 inch base width are required in a Kitchen Kompact Chadwood layout.
Sold In: 1 Each