Kitchen Kompact Chadwood sink base gives you a 33 inch wide, 34-1/2 inch high, 24 inch deep cabinet that anchors a sink run with a consistent footprint, so layouts line up with standard kitchen dimensions. The recessed, flat panel Chadwood doors use solid 3/4 inch oak frames with mortised and tenoned construction, creating a rigid door that holds alignment under repeated opening in everyday kitchen use. A flat panel plywood insert with a three-ply panel and rotary cut red oak veneer face provides a stable, paint-ready and stain-ready surface that visually matches the oak frame during installation. Solid wood corner blocks that are glued and power nailed reinforce the cabinet box, which supports square installation and helps keep joints tight in service. Solid wood hanging strips at the top and bottom give a solid anchor line for mounting to wall framing so the base stays put once set in place.
The 33 inch width, 34-1/2 inch height, and 24 inch depth of this Kitchen Kompact Chadwood sink base set a predictable footprint for countertop templating and alignment with adjacent bases. Solid wood hanging strips at the top and bottom give stable locations for screws into wall framing and neighboring cabinets, supporting a tight, continuous face across the run. Solid wood corner blocks that are glued and power nailed hold the cabinet square while it is being lifted, slid, and shimmed into place. Adjustable shelves inside the cabinet can be moved to clear plumbing traps and lines after the sink cutout is complete, which helps preserve storage without cutting interior components. The recessed panel Chadwood doors sit on concealed, self-closing hinges, so once the cabinet is leveled and doors are adjusted, the hinges pull doors closed in daily use without external hardware showing at the frame.
The Kitchen Kompact CW33RBS Chadwood sink base is built as a 33 inch wide, 34-1/2 inch high, 24 inch deep cabinet, matching common base cabinet dimensions for kitchen sink runs. Oak flat panel doors with recessed styling align visually with other Chadwood cabinets in the same line, creating a consistent front when building a full base layout. Solid wood toe kicks at 3/4 inch thick form a sturdy lower front, so the cabinet sits properly in a base line while allowing flooring to terminate cleanly at the face. Solid wood corner blocks and hanging strips give the cabinet structural strength for typical kitchen loads around the sink area, such as countertop weight and daily door use. The three-ply flat panel plywood insert with rotary cut red oak veneer face carries the oak grain pattern across the door, tying this sink base into adjacent Chadwood wall or base units in the job.
Mortised and tenoned solid 3/4 inch oak door frames give hinge screws a dense, stable substrate, supporting repeated adjustments on the concealed, self-closing hinges without quickly stripping the wood. The concealed, self-closing hinges keep the hardware hidden when doors are closed, which helps present a clean front while still giving controlled closing action during daily use. Plywood drawers with a front to back epoxy-coated drawer system attach securely to a solid wood strip in the back of the cabinet, creating a guided drawer movement that tracks straight, important when aligning drawer fronts with neighboring units. Drawers equipped with a ball bearing operated nylon roller system move smoothly on their tracks, supporting frequent opening and closing in a busy kitchen. The four step process of stain, sealer, sanding, and catalyzed top coat creates a finished surface that is ready for typical kitchen environments, letting installers focus on layout, scribing, and alignment rather than on multi-step finishing. Solid wood toe kicks and corner blocks keep the base solid once fastened, which helps reduce callbacks related to cabinet racking or misaligned doors over time.
The CW33RBS Chadwood sink base measures 33 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits standard base cabinet footprints and coordinates with common countertop depths.
The Chadwood sink base doors use solid 3/4 inch oak frames with mortised and tenoned joints and a flat panel plywood insert, giving a stable, square door that holds alignment during regular kitchen use.
This Kitchen Kompact Chadwood sink base uses concealed, self-closing hinges, which hide the hardware from view and pull the doors closed during everyday operation.
The cabinet uses plywood drawers on a front to back epoxy-coated drawer system attached to a solid wood strip, with a ball bearing operated nylon roller system for guided, smooth drawer travel.
The Chadwood sink base receives a four step process of stain, sealer, sanding, and catalyzed top coat, providing a completed finish suitable for typical kitchen conditions.
The Chadwood sink base uses adjustable shelves, allowing the shelf height to be changed to work around plumbing while still using the cabinet interior for storage.
The Kitchen Kompact Chadwood sink base with 33 inch width, 34-1/2 inch height, and 24 inch depth offers a standard footprint that matches typical kitchen bases, simplifying layout of a sink center. Solid 3/4 inch oak door frames with mortised and tenoned joints, flat panel plywood inserts with rotary cut red oak veneer, and solid wood toe kicks give the cabinet the structure needed for daily kitchen use. Concealed, self-closing hinges, plywood drawers with epoxy-coated drawer systems, and ball bearing operated nylon rollers contribute to smooth operation once the cabinet is installed. For projects using the Chadwood recessed panel style, this CW33RBS sink base lines up visually and dimensionally with other Kitchen Kompact pieces, supporting a consistent, job-ready base run.
Sold In: 1 Each