
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact back panel 34"W x 48"H x 3/16"D DWhite Back Panel, DW34X48, gives you a dedicated Kitchen Kompact solution for finishing the back side of cabinet runs in the DWhite finish. The 34 inch width pairs with standard 34 inch wide Kitchen Kompact layouts, so the panel spans typical cabinet sections in one piece for a clean, continuous surface. The 48 inch height lets you cover tall backs or stacked base configurations within that height range, which streamlines layout compared with piecing smaller panels. The 3/16 inch depth keeps the panel relatively thin, so it adds minimal thickness while still providing a defined finished back surface in the run. The DWhite identification ties directly to the SAP description DWHITE 34X48, helping you align this panel with other DWhite-finished Kitchen Kompact components on the same job.
The Kitchen Kompact 34"W x 48"H x 3/16"D DWhite Back Panel, DW34X48, uses its 34 inch width as a key planning dimension, so cabinet layouts can be arranged to match that span where a single panel is preferred. The 48 inch height lets installers align this panel with upper or lower edges in that range, which supports consistent horizontal lines along the back of cabinet runs. With a 3/16 inch depth, the panel adds only a small build-out, which matters when working near existing walls or trim where total projection is limited. The DWhite designation and the SAP reference DWHITE 34X48 clearly flag this as the DWhite version of the DW34X48 panel, which helps keep finish selections organized on drawings and orders.
The Kitchen Kompact 34"W x 48"H x 3/16"D DWhite Back Panel, DW34X48, is sized for situations where a 34 inch wide DWhite panel closes off the back of Kitchen Kompact cabinet sections. Its 48 inch height supports applications that stay within that vertical span, so the panel can act as a single piece back in many standard-height runs. Because the SAP description identifies it as DWHITE 34X48, this panel aligns with other DWhite-finished Kitchen Kompact components on the same project scope, which helps maintain visual consistency along exposed backs or end-of-run conditions. The 3/16 inch depth provides a defined plane without adding significant overall cabinet depth, which is useful where space between the cabinet back and surrounding walls is limited.
The DW34X48 Kitchen Kompact back panel defines its size clearly at 34"W x 48"H x 3/16"D, giving fabricators fixed numbers to build around instead of field-measuring unknown stock. That defined width lets cabinet sections be grouped to match a 34 inch span, helping reduce trimming and on-site modification when a continuous DWhite back is desired. The stated 48 inch height offers predictable coverage, so elevations can be drawn knowing exactly how far the panel will extend vertically. Its 3/16 inch depth sets an expectation for how much thickness this layer adds behind the cabinet, which assists when aligning cabinets relative to walls or services. The DWhite and DWHITE 34X48 references also support accurate ordering and replacement, because the same identifiers can be repeated on documents whenever another identical Kitchen Kompact DW34X48 back panel is required.
The Kitchen Kompact 34"W x 48"H x 3/16"D DWhite Back Panel, DW34X48, measures 34 inches wide, 48 inches high, and 3/16 inch deep, which supports dimensioned cabinet planning.
The Kitchen Kompact 34"W x 48"H x 3/16"D DWhite Back Panel, DW34X48, carries the DWhite designation and SAP description DWHITE 34X48, identifying it as the DWhite-finished back panel for matching projects.
The back panel is identified as Kitchen Kompact 34"W x 48"H x 3/16"D DWhite Back Panel, DW34X48, with SAP description DWHITE 34X48, giving purchasing and project teams precise references.
The Kitchen Kompact 34"W x 48"H x 3/16"D DWhite Back Panel, DW34X48, is 34 inches wide, so it pairs with cabinet layouts built around a 34 inch wide back span.
The Kitchen Kompact 34"W x 48"H x 3/16"D DWhite Back Panel, DW34X48, has a depth of 3/16 inch, which adds limited thickness while providing a defined finished back surface.
The 34"W x 48"H x 3/16"D DWhite Back Panel, DW34X48, is part of the Kitchen Kompact line, so it matches the Kitchen Kompact brand offering.
The Kitchen Kompact 34"W x 48"H x 3/16"D DWhite Back Panel, DW34X48, gives you a clearly defined 34 by 48 inch panel in the DWhite finish for Kitchen Kompact cabinet work. Its 34 inch width, 48 inch height, and 3/16 inch depth support straightforward planning when a single back panel is needed in that size range. Using the DW34X48 part number and DWHITE 34X48 SAP description keeps the specification consistent from design through ordering whenever this DWhite Kitchen Kompact back panel is required on a project.
Sold In: 1 Each