Kitchen Kompact Chadwood vanity sink base cabinet provides a 30 inch wide, 30-1/2 inch high, 21 inch deep vanity sink base that gives installers a defined footprint for bathroom layouts. The cabinet is built as a recessed panel Chadwood vanity, so it delivers a consistent, traditional panel look across a run of cabinets. Door frames use mortised and tenoned construction of solid 3/4 inch oak, creating a solid joint at each corner that supports repeated door use over time. Solid wood corner blocks are glued and power nailed, tying the cabinet corners together so the box resists racking when moved, set, or loaded. Solid wood hanging strips are located on the top and bottom, giving clear structural members to fasten through when securing the cabinet to wall framing. The flat panel plywood insert is a three-ply panel with a rotary cut red oak veneer face, so the door panels align visually with the oak frame.
This Kitchen Kompact vanity sink base measures 30 inches wide, 30-1/2 inches high, and 21 inches deep, which sets clear cabinet footprint dimensions for planning bathroom layouts. The solid wood hanging strips located on the top and bottom of the cabinet give defined areas for fastening the unit to wall framing, which helps position the vanity accurately during installation. Solid wood corner blocks that are glued and power nailed reinforce the cabinet corners, so the box stays square as it is lifted into place or shimmed to level. Mortised and tenoned 3/4 inch solid oak door frames provide a rigid door structure that works with the concealed, self-closing hinges to keep door reveals consistent after mounting. The oak flat panel doors and rotary cut red oak veneer panel face deliver a unified appearance once the cabinet is installed.
The Chadwood vanity sink base from Kitchen Kompact is suited to bath installations needing a 30 inch wide, 30-1/2 inch high, 21 inch deep cabinet footprint, giving designers and installers a defined base for sink and top selection. Its recessed panel Chadwood styling with oak flat panel doors works in projects calling for an oak appearance, because the three-ply panel has a rotary cut red oak veneer face that visually aligns with the solid 3/4 inch oak door frames. Solid wood hanging strips at the top and bottom of the cabinet provide structural members that interact well with wall framing in typical bath layouts. Solid wood corner blocks, glued and power nailed, help the cabinet remain rigid while being moved into alcoves or positioned against adjacent cabinetry. Concealed, self-closing hinges maintain clean exterior lines on the door faces, which supports a finished look in residential bathroom environments.
Mortised and tenoned construction of the solid 3/4 inch oak door frames gives defined joinery at each corner, which helps the doors hold alignment over repeated opening and closing after installation. The flat panel plywood insert with its rotary cut red oak veneer face provides a stable panel that sits within the frame, supporting a flush door face that pairs well with tops and trim. Solid wood hanging strips on both the top and bottom edges of the cabinet create predictable fastening zones, simplifying layout of screw locations into wall studs and helping the cabinet sit true on the wall. Solid wood corner blocks, glued and power nailed, distribute stresses across the box, which is useful when the vanity is leveled or when plumbing penetrations are cut through the interior. The 4 step process of stain, sealer, sanding, and catalyzed top coat results in a uniform finish surface that is ready for jobsite handling and final punch-out cleaning.
The CWV30S Chadwood vanity sink base measures 30 inches wide, 30-1/2 inches high, and 21 inches deep, so it fits layouts planned around a 30 inch vanity footprint.
The vanity cabinet doors use mortised and tenoned construction of solid 3/4 inch oak, creating strong corner joints that help the doors stay square and operate smoothly in daily use.
The flat panel insert is a three-ply plywood panel with a rotary cut red oak veneer face, giving the door a consistent oak appearance that matches the surrounding solid oak frame.
The vanity uses a 4 step process of stain, sealer, sanding, and catalyzed top coat, producing a uniform finished surface ready for installation in bath projects.
The vanity uses solid wood hanging strips located on the top and bottom, creating clear structural zones for fastening the cabinet body to wall framing.
The Chadwood vanity doors use concealed, self-closing hinges, so the hardware stays hidden while pulling the doors closed to a consistent resting position.
This Kitchen Kompact Chadwood vanity sink base, model CWV30S, provides a 30 inch wide, 30-1/2 inch high, 21 inch deep cabinet footprint with recessed panel oak styling for bathroom projects. Mortised and tenoned solid 3/4 inch oak door frames, three-ply plywood panels with rotary cut red oak veneer faces, and solid wood corner blocks that are glued and power nailed create a rigid structure suited to bath environments. Solid wood hanging strips at the top and bottom establish clear fastening zones for mounting. Concealed, self-closing hinges and adjustable shelves add day-to-day usability. For projects designed around a 30 inch vanity width and an oak recessed panel look, this Chadwood vanity sink base aligns cabinet construction details with practical installation needs.
Sold In: 1 Each