Kitchen Kompact Chadwood base cabinet is a 27 inch wide, 34-1/2 inch high, 24 inch deep cabinet built for kitchen runs that need a consistent footprint. The oak flat panel doors use mortised and tenoned construction of solid 3/4 inch oak, which creates a solid frame joint that holds alignment under repeated use. A flat panel plywood insert with a three-ply panel and a rotary cut red oak veneer face provides a stable center panel while matching the oak grain for a unified door appearance across a bank of cabinets. Solid wood corner blocks that are glued and power nailed tie the cabinet box together, so the case stays square during setting, leveling, and countertop installation. Solid wood hanging strips located on the top and bottom give solid anchoring surfaces when fastening the cabinet to framing or adjoining cabinets along a run.
Adjustable shelves in this base cabinet give flexibility during layout, so interior space can be set during final installation without altering the cabinet structure. The concealed, self-closing hinges on the oak flat panel doors keep hardware out of sight when the doors are closed while providing a self-closing action that pulls doors to the frame, which helps doors sit consistently flush along a run. Plywood drawers are standard, and the front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet for stability, so drawer slides have a solid anchor point that supports smooth travel. Drawers equipped with a ball bearing operated nylon roller system run along these slides, giving a guided motion that helps drawers open and close predictably under normal kitchen loads.
The 27W x 34-1/2H x 24D base cabinet size suits standard kitchen layouts that use a 24 inch deep base and a typical counter height, so it can be placed in a run without special adjustments to depth or height. Oak flat panel doors tie visually with other oak elements, which supports use in full kitchen runs built around the same Chadwood style. The solid wood hanging strips on the top and bottom let this unit tie into wall framing and adjacent cabinets, helping maintain a straight front line. Solid wood toe kicks at 3/4 inch thick give a firm base where flooring meets the cabinet front, which helps when aligning scribe pieces or flooring edges. With the base dimensions and construction matching a standard footprint, installers can drop this cabinet into typical layouts that call for a 27 inch wide base position.
The mortised and tenoned construction of solid 3/4 inch oak door frames creates repeatable joints that stay square, helping doors hang correctly on their concealed, self-closing hinges and line up along a row of cabinets. The flat panel plywood insert with a rotary cut red oak veneer face maintains a consistent door surface, limiting panel movement that could affect reveal lines, which supports clean visual alignment over time. Solid wood corner blocks that are glued and power nailed hold the cabinet box in square, reducing the time spent fighting twist or bow when leveling and shimming. Solid wood hanging strips at the top and bottom give known fastening zones, helping installers drive fasteners into material that holds during tightening. The plywood drawers and front to back epoxy-coated drawer system, securely attached to a solid wood strip in the back, combine with the ball bearing operated nylon roller system to support straight drawer travel, which is important for drawers to close properly under normal loads.
The Kitchen Kompact Chadwood base cabinet measures 27 inches wide, 34-1/2 inches high, and 24 inches deep, so it aligns with standard base cabinet and countertop dimensions.
The door frames use mortised and tenoned construction of solid 3/4 inch oak with a flat panel plywood insert, providing a solid frame and stable panel for consistent door alignment.
The cabinet uses concealed, self-closing hinges, so the hardware stays hidden when doors are shut while drawing the doors closed to the face frame.
The plywood drawers run on a front to back epoxy-coated drawer system with a ball bearing operated nylon roller system, giving guided drawer motion under everyday use.
The cabinet receives a 4 step process of stain, sealer, sanding, and a catalyzed top coat, creating a finished surface suited to typical kitchen environments.
Solid wood hanging strips located on the top and bottom provide defined fastening areas, helping the cabinet fasten securely to wall framing and adjacent cabinets.
The Kitchen Kompact Chadwood base cabinet in 27W x 34-1/2H x 24D gives a standard footprint backed by solid 3/4 inch oak door frames, flat panel plywood inserts with a red oak veneer face, and solid wood corner blocks. Concealed, self-closing hinges, adjustable shelves, and plywood drawers on a ball bearing operated nylon roller system tie construction and function together for everyday kitchen use. For projects calling for a 27 inch wide base in the Chadwood style, this CW27B cabinet aligns size, construction, and finish into a straightforward selection.
Sold In: 1 Each