Kitchen Kompact Chadwood sink base gives you a 30 inch wide, 34-1/2 inch high, 24 inch deep cabinet built for straightforward kitchen runs where a standard sink base footprint is required. The cabinet uses door frames with mortised and tenoned construction in solid 3/4 inch oak, which ties the corners together mechanically so the door joints stay tight under everyday opening and closing. A flat panel plywood insert with a three-ply panel and rotary cut red oak veneer face keeps the center panel stable while maintaining a consistent red oak grain appearance across the front. Solid wood corner blocks are glued and power nailed, forming a rigid connection that supports the cabinet box under load in typical sink installations. Solid wood hanging strips at the top and bottom provide solid fastening points so the cabinet can be anchored firmly to wall studs in a row of bases.
The CW30RBS sink base uses solid wood hanging strips at both the top and bottom, giving you continuous solid backing where you fasten the cabinet to wall framing in a straight run. Plywood drawers are standard, providing a stable box that resists racking when loaded with typical kitchen items. The front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet, tying the slide hardware into solid material instead of thin backing, which helps the drawers track correctly through full travel. Drawers use a ball bearing operated nylon roller system, so the drawer movement remains smooth along the slide path during day-to-day use in a busy kitchen.
The Kitchen Kompact 30 inch sink base cabinet size of 30 inches wide by 34-1/2 inches high by 24 inches deep fits standard base cabinet lines that are planned around common kitchen counter depths. Oak flat panel doors in the Chadwood style match other Chadwood pieces, so this sink base can sit in the center of a run with side cabinets sharing the same front profile and red oak veneer appearance. The solid wood toe kicks at 3/4 inch thickness carry the Chadwood material down to the floor line, which supports a continuous toe space look when this cabinet is aligned with adjacent bases. Solid wood corner blocks that are glued and power nailed hold the box square as you bring multiple cabinets together, so reveals between units stay more consistent once installed in a straight line.
Door frames built with mortised and tenoned solid 3/4 inch oak give the hinge side and latch side joints a deep wood-to-wood connection, which helps the concealed, self-closing hinges keep doors aligned over time without relying only on surface screws. The flat panel plywood insert with a three-ply panel and rotary cut red oak veneer face maintains a stable center panel, so panel movement has less effect on finishing lines around the frame, supporting a uniform appearance across multiple cabinets. Solid wood hanging strips at the top and bottom create predictable fastening zones, which allows consistent screw placement from cabinet to cabinet when you are setting a full kitchen. Plywood drawers paired with the epoxy-coated front to back drawer system and ball bearing operated nylon roller system provide a drawer action that feels the same from one cabinet to the next, simplifying homeowner expectations when several bases in the kitchen use the same drawer setup. The 4 step finish with stain, sealer, sanding, and a catalyzed top coat locks color and top surface together in one system, so matching replacement pieces in the Chadwood line remain visually aligned with existing cabinets finished the same way.
The CW30RBS sink base measures 30 inches wide, 34-1/2 inches high, and 24 inches deep, which matches standard base cabinet sizing for typical kitchen countertop and toe space layouts.
The Chadwood sink base doors use mortised and tenoned solid 3/4 inch oak frames with a flat panel plywood insert and a rotary cut red oak veneer face, giving a solid frame with a matching oak grain panel.
The CW30RBS uses plywood drawers with a front to back epoxy-coated drawer system that attaches to a solid wood strip in the back, and a ball bearing operated nylon roller system for smooth movement.
This Kitchen Kompact sink base uses concealed, self-closing hinges, so the hardware stays hidden when doors are closed and the hinges pull the doors shut for a consistent resting position.
The oak finish uses a 4 step process of stain, sealer, sanding, and catalyzed top coat, creating a controlled finish system that seals the wood surfaces for routine kitchen use.
Solid wood hanging strips at the top and bottom, along with solid wood corner blocks that are glued and power nailed, provide strong fastening and support points when tying cabinets together.
The Kitchen Kompact Chadwood CW30RBS sink base combines a 30 inch by 34-1/2 inch by 24 inch cabinet footprint with mortised and tenoned solid oak door frames, flat panel plywood inserts, and solid wood toe kicks to match Chadwood runs. Concealed, self-closing hinges and a 4 step stain, sealer, sanding, and catalyzed top coat system support daily use in active kitchens. Plywood drawers with a front to back epoxy-coated drawer system, a solid wood rear strip, and a ball bearing operated nylon roller system give smooth drawer action. Solid wood hanging strips and corner blocks back up the structure, letting this cabinet serve as a dependable sink base in a coordinated Kitchen Kompact layout.
Sold In: 1 Each