Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood sink base gives a 60 inch wide, 34-1/2 inch high, 24 inch deep base cabinet sized for typical double-bowl sink layouts, so installers can plan long runs and center sinks with predictable dimensions across the kitchen line.
The Glenwood sink base uses a recessed panel style, so the front design matches other Glenwood pieces in the Kitchen Kompact cabinet family, helping projects keep a consistent, coordinated look across bases and walls in the same job.
All frames on this Glenwood 60SB sink base are built of solid 3/4 inch oak, maple, or beech, providing a substantial face frame structure that resists racking during handling and allows hinges and doors to sit square along the opening.
Because the cabinet is part of the Kitchen Kompact category, it fits into projects already using that product class, which helps installers extend existing layouts or plan full kitchens around the same construction details and visual style.
This Glenwood 60SB unit measures 60 inches wide, 34-1/2 inches high, and 24 inches deep, so installers can plan appliance gaps and countertop depths around these fixed dimensions and coordinate sink cutouts in the countertop material.
All frames built of solid 3/4 inch oak, maple, or beech create a clear face frame outline, which helps with door alignment, hinge placement, and consistent reveals when this sink base is set between other Kitchen Kompact cabinets.
The combination of solid wood hanging strips on base cabinets at both top and bottom and the 3-ply end panels gives clear structural lines for shimming and fastening, helping the cabinet sit level under stone or laminate tops.
The Kitchen Kompact 60 inch Glenwood sink base serves as the central cabinet under a kitchen sink, with its 24 inch depth matching standard countertop depth so the front frame aligns with neighboring bases in a straight run.
At 34-1/2 inches high, the Glenwood sink base aligns with standard base cabinet height before countertop installation, which supports a consistent working height across the kitchen once the chosen top is installed over the cabinet row.
All frames of solid 3/4 inch oak, maple, or beech provide a solid surface for mounting doors at the sink opening, which is frequently used, so hinge screws sit in hardwood material that holds threads during repeated open-and-close cycles.
End panels made from 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers give the sides dimensional stability along long walls, helping the sink base tie smoothly into adjoining units without telegraphing minor framing irregularities.
Solid wood toe kicks, 3/4 inch thick, add strength where the cabinet meets the floor, which keeps this high-traffic sink area visually consistent over time as users stand close to the base and contact the lower front with shoes or cleaning tools.
Solid wood corner blocks that are glued and power nailed help the cabinet box maintain its shape when installers move it into position, so the frame stays square and ready for countertop templating or direct top installation.
Each kiln-dried rail joined by mortise and tenon and then glued creates predictable frame squareness, so door reveals on the Glenwood 60SB are easier to keep even, reducing on-site tweaking and hinge adjustments during trim-out.
Solid wood hanging strips on base cabinets, located at the top and bottom, give installers clear fastening zones that accept screws into solid material, helping the cabinet stay tight to wall studs and reducing the chance of movement after the countertop is set.
The 3-ply end panels with a 1/2 inch thick engineered wood core and hardwood veneers resist warping, which supports straight seams where this sink base meets adjacent cabinets and keeps the run flat under rigid countertop materials.
Solid wood corner blocks glued and power nailed add internal triangulation to the box, so the structure resists racking when leveled with shims, maintaining alignment between the sink cutout, the cabinet opening, and the face frame.
Solid 3/4 inch toe kicks give more material at the front bottom edge, supporting finishes along the kick area and providing a sturdy base for trim pieces that may be applied along the toe line in coordinated Glenwood installations.
Because the product sits in the Kitchen Kompact cabinet category, its construction details, such as solid frames and engineered end panels with hardwood veneers, align with other cabinets in the line and support consistent installation methods across the project.
The Glenwood 60SB sink base measures 60 inches wide, 34-1/2 inches high, and 24 inches deep, so layout planning for countertops and adjacent cabinets can follow standard kitchen base dimensions.
The sink base frame is built of solid 3/4 inch oak, maple, or beech, giving a hardwood face frame that supports door mounting and helps the cabinet resist racking in daily use.
Each rail on the sink base is kiln-dried, joined by mortise and tenon, and then glued, producing tight frame joints that help keep the cabinet square during installation and over time.
End panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving stable, flat sides that align cleanly with neighboring cabinets.
The 3/4 inch thick solid wood toe kicks reinforce the lower front of the cabinet, supporting finish durability and stability where feet and cleaning tools often contact the base.
Solid wood hanging strips at the top and bottom of base cabinets provide defined fastening zones to wall framing, helping keep the sink base secure and aligned in the run.
The Kitchen Kompact Glenwood 60 inch sink base brings a 60 inch wide, 34-1/2 inch high, 24 inch deep cabinet into projects that use Glenwood recessed panel styling, so runs around the sink keep both structure and appearance consistent.
With solid 3/4 inch hardwood frames, mortise-and-tenon kiln-dried rails, solid wood corner blocks, 3/4 inch solid wood toe kicks, and 3-ply end panels with a 1/2 inch engineered core and hardwood veneers, this GW60SB Glenwood sink base supports straightforward, predictable kitchen installations.
Sold In: 1 Each