Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Glenwood back panel 34 x 48 defines this Kitchen Kompact GW34X48 panel as a sized solution for 34 inch wide, 48 inch high cabinet runs, so installers can plan layouts around a consistent back panel dimension. As part of the Kitchen Kompact cabinet line, it is specified to match the Glenwood series construction, which helps maintain continuity across a run of kitchen cabinets during new installs or replacements. The product description identifies it as a back panel, so it is intended to finish or close off the back of a cabinet assembly in a coordinated way. When paired with Kitchen Kompact frames and end panels, this back panel helps create a unified Glenwood appearance across wall and base cabinets, which can simplify selection when multiple pieces of the same series are needed on a job.
This Kitchen Kompact cabinet system description places the Glenwood back panel within a structure that relies on solid wood hanging strips at the top and bottom of wall and base cabinets, which sets clear load paths when the cabinet box is fastened to framing. Because the frames are built of 3/4 inch solid oak, maple, or beech, the 34 inch wide by 48 inch high back panel is designed to intersect with a hardwood frame perimeter rather than a light-duty surround, supporting a more substantial assembly plane. The kiln-dried mortise and tenon rails tie those frame edges together, so the mounted back panel works with joints intended for added strength instead of flexing across weak corners.
The GLENWOOD BACKPANEL 34 X 48 designation and GW34X48 manufacturer part number identify this piece as part of the Glenwood line in the Kitchen Kompact cabinet family, which aligns it with other Glenwood components on a project. At 34 inches wide and 48 inches high, it suits cabinet layouts built around that footprint, so designers and installers can plan a back surface that matches the cabinet framework size. Within a run that uses end panels of 3-ply construction over a 1/2 inch engineered wood core with hardwood veneers, this back panel positions against adjoining elements designed with multilayer construction, helping the finished rear surface visually tie into the same material approach. When used in combination with solid wood toe kicks beneath base cabinets, the vertical back panel sits over a foundation specified as 3/4 inch thick solid wood, supporting a consistent structural story from floor to top rail.
The Kitchen Kompact Glenwood back panel benefits from a cabinet framework built of 3/4 inch solid oak, maple, or beech, because a hardwood frame offers a defined edge reference when aligning the panel for a straight, consistent back plane. Kiln-dried, mortise and tenon glued rails create stable joints, so once the back panel is tied into the cabinet box, movement at the connections is reduced, which supports long-term alignment. Solid wood corner blocks that are glued and power nailed mean the corners bracing the back panel are reinforced, helping keep the rear surface square relative to the sides. Solid wood hanging strips at the top and bottom of wall and base cabinets, as described for this line, provide reliable zones that share loads from the back panel area into wall structure. Around the sides, 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers give a balanced substrate for the back panel area, helping the finished cabinet assembly feel consistent from side to back.
The Kitchen Kompact 34 inch by 48 inch Glenwood back panel is part of the Glenwood series in the Kitchen Kompact cabinet family, so it aligns with other Glenwood-labeled components.
The Glenwood back panel is identified as 34 inches wide by 48 inches high with a 3/16 inch depth, so it suits cabinet layouts designed around that specific rear panel size.
Kitchen Kompact frames use 3/4 inch solid oak, maple, or beech rails, kiln-dried and mortise and tenon joined, so the back panel aligns to a hardwood frame designed for added strength.
The solid wood hanging strips at the top and bottom of wall and base cabinets carry loads from the back panel plane into wall structure, supporting a steady mounted cabinet position.
The 3 ply end panels use a 1/2 inch engineered wood core with hardwood veneers, so adjoining surfaces to the Glenwood back panel share a layered construction with a hardwood face.
The manufacturer part number is GW34X48, which identifies this specific 34 inch by 48 inch Glenwood back panel within the Kitchen Kompact product range.
The Kitchen Kompact Glenwood back panel 34 x 48, part number GW34X48, offers a defined size that aligns with Glenwood series cabinet construction, so it suits projects that already specify Kitchen Kompact frames, solid wood hanging strips, and 3-ply end panels. Using this panel where 34 inch width and 48 inch height are required helps keep the rear surfaces consistent with the rest of the Glenwood assembly. For Glenwood-based layouts, choosing this part number allows the back panel to follow the same cabinet system logic from Wurth Baer Supply.
Sold In: 1 Each