
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact Chadwood base cabinet gives you a 12 inch wide, 34-1/2 inch high, 24 inch deep base unit that creates a standard-depth run for kitchen layouts. This cabinet size fits narrow base locations while still providing functional storage in tight kitchen plans. Door frames use mortised and tenoned construction of solid 3/4 inch oak, which creates strong joints around the opening so the door resists racking during everyday use. The flat panel plywood insert is a three-ply panel with a rotary cut red oak veneer face, so the center panel stays stable while presenting a consistent oak grain for stain-match work. Oak flat panel doors tie the frame and insert together, giving a unified, all-oak door appearance that matches other Chadwood pieces. Solid wood hanging strips located on the top and bottom support installation to wall surfaces, so the cabinet body stays aligned when you fasten it into place.
This Kitchen Kompact 12 inch wide Chadwood base cabinet stands 34-1/2 inches high and 24 inches deep, so it lines up with standard base cabinet heights and depths in typical kitchen layouts. Solid wood hanging strips located on the top and bottom give you defined fastening zones along the back, which supports a straightforward mounting pattern to wall studs. The solid wood toe kicks are 3/4 inch thick, providing a strong front support edge when you rest the cabinet on the floor and level it with adjacent units. The front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet, so drawer slides stay anchored during installation and do not shift when you move the cabinet into final position. Oak flat panel doors and the three-ply plywood panel with red oak veneer face arrive ready for the described four step finishing process, which supports a consistent appearance across a full Chadwood run.
The Kitchen Kompact 12 inch wide Chadwood base cabinet fits narrow spaces in a base run where full-width cabinets will not work, yet a standard 24 inch depth is still required for countertop support. Its 34-1/2 inch height aligns with typical base cabinet and countertop heights, allowing this CW12B unit to integrate smoothly between wider cabinets in the same line. Oak flat panel doors with a three-ply plywood insert using a rotary cut red oak veneer face match other Kitchen Kompact Chadwood pieces, which supports visual continuity on longer walls. Solid wood toe kicks, 3/4 inch thick, form a sturdy front base that holds up at common traffic points such as beside a range or sink stack. Adjustable shelves inside the cabinet help you configure vertical space for items that often end up in narrow bases, such as baking sheets or tall bottles.
Door frames built from mortised and tenoned solid 3/4 inch oak create precise, interlocking joints that help the doors hang square and stay aligned with the cabinet front over time. Solid wood corner blocks that are glued and power nailed tie the cabinet box together at key stress points, which reduces flex when countertops are set on top and loads are added. Solid wood hanging strips located on the top and bottom give consistent fastening locations, which helps you repeat a reliable mounting pattern from one cabinet to the next along a wall. Plywood drawers combined with a front to back epoxy-coated drawer system securely attached to a solid wood strip in the back of the cabinet keep drawer motion stable, so hardware alignment stays true after installation. Drawers equipped with a ball bearing operated nylon roller system move smoothly along their travel, which reduces wear on the drawer sides and contributes to a cleaner open and close action. The 4 step process of stain, sealer, sanding and catalyzed top coat is applied to the oak components, creating a finished surface that supports everyday kitchen use while maintaining the Chadwood appearance in a coordinated installation.
The Kitchen Kompact Chadwood CW12B base cabinet measures 12 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits standard-depth base cabinet runs in tight width locations.
The door frames use mortised and tenoned construction of solid 3/4 inch oak with a flat panel plywood insert, giving a rigid, all-oak framed door suited to regular kitchen use.
The Kitchen Kompact Chadwood 12 inch base cabinet uses adjustable shelves, allowing shelf position changes to better fit stored cookware or pantry items.
The cabinet has plywood drawers on a front to back epoxy-coated drawer system securely attached to a solid wood strip, providing stable support for drawer movement.
Drawers are equipped with a ball bearing operated nylon roller system, which gives smoother drawer travel and reduces resistance during opening and closing.
The Kitchen Kompact Chadwood cabinet uses a 4 step process of stain, sealer, sanding and catalyzed top coat, providing a coated oak surface appropriate for kitchen environments.
The Kitchen Kompact Chadwood 12 inch wide base cabinet provides a narrow footprint with a 34-1/2 inch height and 24 inch depth that work in standard kitchen runs. Mortised and tenoned solid 3/4 inch oak door frames, oak flat panel doors, and solid wood corner blocks create a sturdy cabinet body suited to everyday loading. Adjustable shelves and plywood drawers on a front to back epoxy-coated system deliver flexible interior storage. For projects calling for matching Chadwood units across a run, this CW12B size fills slim base gaps while keeping the same oak flat panel appearance.
Sold In: 1 Each