Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood wall cabinet in the GW24A model gives installers a 24 inch wide diagonal corner wall solution sized at 24 inches wide, 30 inches high, and 12 inches deep, so upper runs can turn a corner cleanly in a standard kitchen layout. The cabinet uses a recessed panel Glenwood design, which keeps the door style consistent across a Glenwood job for a uniform finished look. All frames are built of solid 3/4 inch oak, maple or beech, which provides a rigid front structure that holds hinges and doors stable over repeated use. Each rail is kiln-dried, joined by mortise and tenon, and then glued for added strength, creating a tight frame that resists twisting during transport, handling, and mounting. The Kitchen Kompact brand and GW24A designation identify this unit for projects that call out Glenwood 24A in plans or material lists.
The Kitchen Kompact diagonal corner wall design in the GW24A cabinet uses solid wood hanging strips on wall cabinets at both the top and bottom, which supplies two continuous structural zones for anchoring the unit to studs along the corner. The 24 inch width, 30 inch height, and 12 inch depth establish familiar dimensions that align with typical upper cabinet runs, helping installers coordinate this corner unit with adjacent straight Glenwood wall cabinets. Kiln-dried rails joined by mortise and tenon and glued for strength hold the face frame square while the cabinet is clamped and fastened to neighboring units, so doors and reveals set more consistently. Solid wood corner blocks that are glued and power nailed help the box hold alignment while the cabinet is handled and positioned during the wall run.
The GW24A diagonal corner wall cabinet fits upper kitchen layouts where a 24 inch wide, 30 inch high, 12 inch deep corner unit is called out in a Glenwood job using a recessed panel style. In this role, the solid 3/4 inch oak, maple or beech frame carries the visual line of the run while providing structural support for doors at the corner transition. Solid wood hanging strips on the wall cabinet at the top and bottom help tie the cabinet into the wall framing at multiple heights, which is useful when the corner must carry loads from neighboring wall units. Solid wood corner blocks that are glued and power nailed further stabilize the cabinet box, supporting the angled geometry of a diagonal corner installation.
The kiln-dried rails joined with mortise and tenon joints and glued for added strength create a rigid Kitchen Kompact Glenwood wall cabinet frame that stays square as it is drawn tight to adjacent units, which helps keep door gaps and reveals uniform along the row. The 3-ply end panels, built around a 1/2 inch thick engineered wood core with hardwood veneers, deliver a stable side surface that resists seasonal movement, helping maintain alignment between the GW24A cabinet and neighboring cabinets over time. Solid wood hanging strips on wall and base cabinets at both top and bottom provide predictable fastening zones on every Glenwood unit, which can streamline layout because installers can rely on consistent attachment locations from cabinet to cabinet. Solid wood toe kicks, 3/4 inch thick on the system base cabinets, carry the same solid material concept down to the floor line, supporting a cohesive installation where upper and lower Glenwood components share similar construction logic.
The Kitchen Kompact Glenwood wall cabinet in the GW24A model is 24 inches wide, 30 inches high, and 12 inches deep, so it matches common upper cabinet sizing in many kitchen layouts.
The cabinet frame is built of solid 3/4 inch oak, maple or beech, giving a strong front structure for hinge mounting and door use across the lifespan of the installation.
Each rail on the GW24A cabinet is kiln-dried, joined by mortise and tenon, and then glued for added strength, which supports a square, rigid frame during mounting and alignment.
The GW24A wall cabinet uses solid wood hanging strips at the top and bottom, giving continuous structural fastening zones for attaching the unit securely to wall framing.
The Kitchen Kompact Glenwood corner cabinet uses solid wood corner blocks that are glued and power nailed, helping the box resist racking during handling and installation.
The end panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, providing a stable side panel with a hardwood surface appearance.
The Kitchen Kompact diagonal corner wall GW24A cabinet combines a solid 3/4 inch oak, maple or beech frame with kiln-dried, mortise and tenon joined rails and glued joints, giving a rigid front that supports doors in Glenwood runs. Solid wood hanging strips at the top and bottom on wall cabinets, plus solid wood corner blocks that are glued and power nailed, provide structural backing while the cabinet is lifted, positioned, and fastened in place. For Glenwood projects calling for a 24 inch wide, 30 inch high, 12 inch deep recessed panel corner unit, this GW24A model keeps construction and appearance aligned across the kitchen.
Sold In: 1 Each