Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood vanity sink base is a 36 inch wide, 30-1/2 inch high, 21 inch deep vanity sink base cabinet designed around solid-frame construction for bathroom or similar sink installations. The cabinet features a recessed panel Glenwood style front, so it aligns with Glenwood face designs across a project for a unified look. All frames are built of solid 3/4 inch oak, maple or beech, which creates a rigid front structure that holds squareness during handling and setting. Each rail is kiln-dried, joined by mortise and tenon, and then glued, so the joints resist movement and help doors and fronts stay aligned over time. Solid wood corner blocks are glued and power nailed at stress points, which ties the sides and front together for added stability under countertop and sink loads. Solid wood toe kicks, 3/4 inch thick, provide a sturdy base contact area that supports weight along the floor line.
This Glenwood vanity sink base uses solid wood hanging strips at the top and bottom on base cabinets, which creates predictable fastening points when lining up a run of cabinets. The solid 3/4 inch frame in oak, maple or beech carries fastener loads at the front, so installers can pull units tight to each other without stressing thin material. Mortise and tenon, kiln-dried, glued rails keep the frame square, which supports level countertop installation across the 36 inch width. Solid wood corner blocks that are glued and power nailed help the box stay rigid while shimming the toe area or working around floor variations. The 3/4 inch solid wood toe kicks offer a durable contact area at the floor, supporting leveling adjustments while maintaining continuous support under the front edge.
The Glenwood vanity sink base with 36 inch width, 30-1/2 inch height, and 21 inch depth suits layouts that call for a standard-width sink base in a coordinated Glenwood recessed panel run. The solid 3/4 inch oak, maple or beech face frame supports attachment of fronts and alignment with other Kitchen Kompact cabinets in the same series. At the sides, 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers give the cabinet stable, finished surfaces that can align flush against adjacent cabinets or finished walls. Solid wood corner blocks at the back and front help the cabinet handle the added weight and vibration of a countertop, sink, and normal use in a vanity environment.
Mortise and tenon joints on kiln-dried rails, glued for added strength, keep the frame square, which reduces the effort needed to align doors and fronts during initial setup and later adjustments. Solid wood hanging strips at the top and bottom on base cabinets give consistent attachment areas vertically, which matters when installers are tying the vanity into studs or integrating it with a full cabinet line. The 3/4 inch solid wood toe kicks run along the base, providing a sturdy surface to rest shims against while dialing in height and level, helping maintain contact across the floor. Solid wood corner blocks that are glued and power nailed reinforce joints so the box resists racking when clamps or fasteners are applied during install. The 3-ply end panel construction with engineered wood core and hardwood veneers adds dimensional stability at the sides, which helps maintain alignment of reveals over time.
The Kitchen Kompact Glenwood vanity sink base measures 36 inches wide, 30-1/2 inches high, and 21 inches deep, which supports standard vanity layout planning and countertop sizing.
The Glenwood vanity sink base frame is built of solid 3/4 inch oak, maple or beech, giving a rigid front structure that supports hardware attachment and alignment.
Each rail on the Glenwood vanity sink base is kiln-dried, joined by mortise and tenon, and then glued, creating tight joints that help the frame resist racking during use.
The Glenwood vanity sink base uses solid wood corner blocks that are glued and power nailed, reinforcing cabinet corners under countertop and sink loads.
End panels on the Glenwood vanity sink base use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, providing stable, finish-ready sides.
The Glenwood vanity sink base has a 3/4 inch thick solid wood toe kick, creating a sturdy floor contact area that supports leveling and front-edge load.
The Kitchen Kompact Glenwood vanity sink base GWV36SD combines a solid 3/4 inch oak, maple or beech frame with kiln-dried, mortise and tenon, glued rails and reinforced corners to support sink and countertop loads. Its 36 inch width, 30-1/2 inch height, and 21 inch depth suit standard vanity layouts. Solid wood toe kicks and solid wood hanging strips on base cabinets contribute to stable, predictable mounting and floor contact. For projects built around Glenwood recessed panel styling and solid-frame construction, this vanity sink base provides a structural starting point for the run.
Sold In: 1 Each