Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood vanity sink base cabinet WBSC-2919-KKGWV24S is a 24 inch wide, 30-1/2 inch high, 21 inch deep vanity sink base that provides a sized cabinet box for bathroom sink layouts where a defined footprint is needed. The Glenwood GWV24S recessed panel style sets a consistent look across a Glenwood run, so the vanity ties in visually with matching Kitchen Kompact cabinets on the same job. The cabinet sits in the Kitchen Kompact product class and category, aligning it with the brand standards that installers expect across this line. The 24 inch width, 30-1/2 inch height, and 21 inch depth give clear planning dimensions, which simplifies layout against walls and adjacent cabinets when building a straight, corner, or alcove vanity installation.
The 24 inch width on the Glenwood vanity sink base GWV24S sets a predictable cabinet span, which aids in centering a sink and aligning with adjoining cabinets or wall conditions. The 30-1/2 inch overall height provides a known base elevation before countertop thickness, helping installers plan finished sink height across a bathroom run. The 21 inch depth defines how far the cabinet projects from the wall, which is important when coordinating plumbing locations and clearances to doors or fixtures. The solid wood hanging strips located at the top and bottom of the back give consistent fastening lines across the cabinet, supporting a secure mount when tying the vanity into studs along the wall.
The Glenwood vanity sink base cabinet GWV24S is sized at 24 inches wide, so it suits applications where space is limited but a full sink cabinet is still required. The 21 inch depth works in standard bath layouts where typical countertop depths are planned, allowing the cabinet to align with common bath tops. The recessed panel Glenwood design allows the vanity to match other Glenwood pieces in the same room, creating a unified appearance between vanity and nearby Kitchen Kompact cabinets. The 30-1/2 inch height positions the cabinet as a base for a variety of countertop materials, giving installers a consistent starting point when matching existing bath conditions or planning new work. The 3-ply end panels with hardwood veneers give finished sides that suit exposed ends at alcoves or open wall conditions, so the cabinet can be used in both between-wall and open-side installations.
The solid 3/4 inch oak, maple, or beech frames give the Glenwood vanity sink base a robust front structure, which helps maintain alignment of doors and reveals during transport and installation. Kiln-dried, mortise and tenon, glued rails create a stable frame joint system, so installers can cut for plumbing or adjust leveling without the face frame drifting out of square. Solid wood corner blocks that are glued and power nailed support box integrity under the weight of a sink and countertop, which is important in busy bathrooms. The 3/4 inch thick solid wood toe kicks provide a strong front support zone that can accept shimming at the floor while keeping the visible toe area sound. Solid wood hanging strips at the top and bottom of wall and base cabinets spread fastening loads along the back, aiding in a steady, rattle-free installation when the vanity is anchored to framing. The 3-ply 1/2 inch engineered wood core end panels with hardwood veneers balance appearance with panel stability, helping the cabinet sides stay true in typical bathroom humidity swings so the overall installation looks consistent over time.
The Glenwood vanity sink base GWV24S measures 24 inches wide, 30-1/2 inches high, and 21 inches deep, giving clear planning dimensions for layout in a bathroom project.
The cabinet frames are built of solid 3/4 inch oak, maple, or beech, which provides a rigid face frame that supports doors, hardware, and everyday use in a vanity installation.
Each rail is kiln-dried, joined by mortise and tenon, and then glued, creating strong joints that help the vanity frame stay square during transport, plumbing cutouts, and fastening.
Solid wood corner blocks are glued and power nailed, tying the cabinet box together so it can better handle countertop weight and daily forces on doors and fronts.
The 3/4 inch thick solid wood toe kicks provide a substantial base at floor level, allowing effective shimming and leveling while keeping the visible front support area solid.
End panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving a finished appearance with a stable panel that suits standard bathroom environments.
The Glenwood vanity sink base cabinet GWV24S from Kitchen Kompact combines a 24 inch by 30-1/2 inch by 21 inch cabinet size with solid 3/4 inch oak, maple, or beech frames, so it supports both layout planning and structural demands on site. Mortise and tenon, kiln-dried, glued rails, solid wood corner blocks, and 3/4 inch solid wood toe kicks give this vanity cabinet a defined construction approach that works well where alignment and durability matter. When a project calls for a recessed panel Glenwood look and a compact vanity footprint, this cabinet provides a clearly defined option for professional installers and serious DIY users.
Sold In: 1 Each