Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood vanity sink base is a 24 inch wide, 34-1/2 inch high, 21 inch deep cabinet designed as a vanity sink base, so it fits standard vanity layouts while leaving room for plumbing runs. The Warmwood cabinet uses a recessed panel style, giving a consistent look across Warmwood jobs where this WWV24ST model is specified. All frames are built of solid 3/4 inch oak, maple or beech, so the face frame provides a sturdy front structure that holds doors and aligns with adjoining cabinets during installation. Each rail is kiln-dried, joined by mortise and tenon, and then glued for added strength, which creates a rigid frame that resists racking when the vanity is set, leveled, and fastened on site.
The 24 inch width of this Warmwood vanity sink base lets it fit common single-bowl vanity layouts while leaving clearance for side walls or adjoining cabinets in small bath spaces. At 34-1/2 inches high, the WWV24ST cabinet matches standard vanity height, which helps installers run a level top line when this unit is combined with other cabinets. The 21 inch depth provides the typical bath cabinet projection, balancing top space with access in tighter rooms. Solid wood hanging strips on base cabinets, located at the top and bottom, give reliable fastening points when anchoring the cabinet to wall framing, which supports accurate leveling and long-term rigidity.
This Kitchen Kompact 24W x 34-1/2H x 21D vanity base is sized for bath or vanity runs that call for a sink base in the Warmwood recessed panel line. The cabinet uses a recessed panel style that matches other Warmwood pieces, so runs stay visually consistent when this WWV24ST model is installed with coordinating units. End panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, so the sides provide a stable substrate when the cabinet is set against typical framed or finished walls. Solid wood corner blocks are glued and power nailed, tying the cabinet corners together so the box stays square as it is moved into position, scribed, and fastened.
All frames are built of solid 3/4 inch oak, maple or beech, so the face frame has the mass to hold hinges and door action over time without relying solely on panel material, which is important in busy vanity locations. Each rail is kiln-dried, joined by mortise and tenon, and then glued for added strength, so the frame joints resist loosening when doors are operated repeatedly and when the cabinet is drawn tight to neighboring units. Solid wood toe kicks, 3/4 inch thick, give a substantial base area that can be carefully trimmed or scribed to floor conditions, supporting a clean finished look and even weight transfer. Solid wood hanging strips on base cabinets, located at the top and bottom, allow fasteners to bite into solid lumber, helping installers pull the cabinet securely to studs without crushing or over-driving into weaker material. The 3-ply end panel construction with 1/2 inch thick engineered wood core and hardwood veneers provides dimensional stability at the cabinet sides, which supports smooth top installation across the cabinet and helps keep reveals consistent along adjoining surfaces.
The Kitchen Kompact WWV24ST Warmwood vanity sink base measures 24 inches wide, 34-1/2 inches high, and 21 inches deep, so it fits standard single-bowl vanity layouts.
The Warmwood vanity sink base frame is built of solid 3/4 inch oak, maple or beech, providing a strong face frame for doors and alignment with adjoining cabinets.
The frame rails are kiln-dried, joined by mortise and tenon, and then glued, creating strong joints that help the cabinet resist racking during installation and use.
The Warmwood vanity sink base uses solid wood toe kicks, 3/4 inch thick, providing a sturdy base that can be trimmed or scribed to floor conditions.
The WWV24ST end panels have 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving stable cabinet sides for typical wall conditions.
The Kitchen Kompact base cabinet has solid wood hanging strips located at the top and bottom, providing solid fastening points to wall framing.
The Kitchen Kompact Warmwood vanity sink base, model WWV24ST, combines a 24 inch width, 34-1/2 inch height, and 21 inch depth with a recessed panel style suited to Warmwood jobs. Solid 3/4 inch wood frames, mortise and tenon joined rails, solid wood corner blocks, and 3-ply end panels with an engineered wood core give this cabinet structure for everyday vanity use. For projects built around the Kitchen Kompact Warmwood line, this vanity sink base can occupy the sink position while maintaining construction methods and appearance consistent with the rest of the run.
Sold In: 1 Each