
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood vanity sink base gives installers a 36 inch wide, 34-1/2 inch high, 21 inch deep cabinet sized for standard vanity sink layouts, so it drops into common bath runs without layout gymnastics. The cabinet uses a recessed panel design, which sets up a clean, framed look that matches other Warmwood pieces on the job. The cabinet belongs to the Kitchen Kompact line, so it stays consistent with the manufacturer part WWV36SDT when ordering or matching existing installations. Warmwood styling ties directly to the WARMWOOD V36SDT description, which keeps finish and style identification straightforward during project planning. Being part of a defined Kitchen Kompact cabinet class helps streamline takeoffs and reorders when multiple cabinets from the same line are needed for a project.
The 36 inch wide, 34-1/2 inch high, 21 inch deep size on this Kitchen Kompact vanity sink base sets up predictable clearances with standard counters and plumbing roughs, which streamlines layout work. Solid wood hanging strips at the top and bottom on base cabinets create defined areas for fastening, so installers can anchor into those strips for better hold. Mortise and tenon kiln-dried rails that are glued for added strength hold the face frame square as the cabinet is pulled into plane with shims. Solid wood corner blocks that are glued and power nailed reinforce the structure, so the cabinet box stays aligned when it is lifted, shifted, or clamped during installation.
The Kitchen Kompact 36 inch Warmwood vanity sink base fits bath layouts needing a 34-1/2 inch working height and 21 inch depth, matching many standard countertop depths. Its recessed panel style works wherever a framed, traditional look is specified, keeping visual lines consistent across a Warmwood run. Because it sits in the Kitchen Kompact cabinet class, it pairs logically with other cabinets from the same line in multi-cabinet bath projects. Solid wood toe kicks at 3/4 inch thickness give the cabinet a firm stance on the floor, which helps keep the run steady in alcoves or open wall conditions. The 3 ply end panels with a 1/2 inch engineered wood core and hardwood veneers keep the sides stable, which matters when cabinets are installed against walls that are not perfectly straight.
Solid 3/4 inch oak, maple, or beech frame construction gives the Kitchen Kompact Warmwood vanity sink base a rigid front, so doors and fronts stay aligned once set. Each kiln-dried rail, joined by mortise and tenon and glued, locks the face frame corners together, which reduces the chance of joints opening after seasonal changes in the room. Solid wood corner blocks that are glued and power nailed tie the cabinet sides, front, and bottom, so the box resists twisting when fastened to walls or adjacent cabinets. Solid wood hanging strips on base cabinets at both the top and bottom give two strong fastening planes, helping installers pull the cabinet tight to framing while keeping the box square. The 3 ply end panel design with engineered wood core and hardwood veneers balances strength with smoother faces, so seams and joints along the side meet walls and neighboring cabinets cleanly.
The Kitchen Kompact Warmwood vanity sink base measures 36 inches wide, 34-1/2 inches high, and 21 inches deep, so it aligns with common vanity counter heights and depths.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, giving a rigid front structure that holds hinges, doors, and daily use loads without light-duty flex.
Each rail is kiln-dried, joined by mortise and tenon, and then glued, so the frame joints stay tight and square under humidity changes and fastening pressure during installation.
The vanity uses 3/4 inch solid wood toe kicks and solid wood corner blocks that are glued and power nailed, so the cabinet resists racking and floor contact abuse.
Solid wood hanging strips on base cabinets, located at the top and bottom, provide defined fastening zones to pull the cabinet tight to wall framing or adjacent units.
The end panels use 3 ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving stable sides with hardwood outer faces suited to finishing.
The Kitchen Kompact 36 inch Warmwood vanity sink base, model WWV36SDT, combines a solid 3/4 inch oak, maple, or beech frame with mortise and tenon kiln-dried rails that are glued for strength, giving installers a rigid front to build a bath run around. Solid wood corner blocks and 3/4 inch solid wood toe kicks support the base under real use, while solid wood hanging strips on base cabinets at the top and bottom establish strong fastening points. For projects calling for a recessed panel Warmwood look with defined dimensions and proven frame construction, this cabinet is ready to slot into planned vanity layouts.
Sold In: 1 Each