Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood vanity sink base describes a 24 inch wide, 30-1/2 inch high, 21 inch deep cabinet that provides a sized opening for a vanity sink layout, so installers can plan bathroom runs around a consistent base footprint. The recessed panel design with a maple flat panel door gives a clean, framed look that matches other Kitchen Kompact cabinets, which simplifies coordinating a full room install. Door frames use mortised and tenoned construction in solid 3/4 inch maple, creating tight, interlocking joints that help the doors stay square during daily use. Solid wood corner blocks are glued and power nailed at the cabinet, which stiffens the case and helps the box resist racking when moved into place or when the countertop is set. Solid wood hanging strips located on the top and bottom give a firm fastening area, helping the cabinet sit solidly against wall framing.
This Warmwood WWV24S vanity sink base measures 24 inches wide, 30-1/2 inches high, and 21 inches deep, so installers can lay out bathroom walls and plumbing centers around a defined cabinet footprint. The recessed panel maple doors with mortised and tenoned solid 3/4 inch frames hang from concealed, self-closing hinges, giving doors that close themselves into alignment while keeping hinge hardware out of sight. Solid wood hanging strips at the top and bottom present continuous fastening areas along the back, which helps anchor the cabinet directly to framing for a stable, square installation. Inside the case, adjustable shelves can be positioned to work around supply lines or traps, letting the installer adjust interior space after rough plumbing is in place without altering the cabinet structure.
The Kitchen Kompact 24 inch Warmwood vanity sink base works in layouts that call for a compact cabinet with a defined 21 inch depth and 30-1/2 inch height, so it suits standard bathroom runs using that base size. The recessed panel design with a maple flat panel door and rotary cut hard maple veneer face allows this unit to visually coordinate with other Kitchen Kompact Warmwood cabinet components, supporting consistent styling across a project. Mortised and tenoned solid 3/4 inch maple door frames handle repeated door operation while maintaining joint integrity, which suits higher use locations such as shared bathrooms. Solid wood corner blocks that are glued and power nailed reinforce the structure at stress points, which supports the load of a sink top and normal use forces on the front frame. Solid wood hanging strips located at the top and bottom of the back give installers reliable wood-to-stud contact points across the cabinet width, which helps hold the case tight to the wall and maintain alignment with adjoining units.
The three-ply flat panel plywood insert with a rotary cut hard maple veneer face supplies a stable center panel with maple grain, helping the door resist warping while keeping the face visually consistent with the frame on repeated projects. The four step Warmwood finishing process - stain, sealer, sanding, and catalyzed top coat - creates a built-up finish layer that seals the maple surfaces, which supports resistance to everyday bathroom humidity and cleaning contact. Concealed, self-closing hinges on the maple flat panel doors allow the door to pull itself closed at the end of travel, which helps installers deliver even door reveals and reduces time spent fine-tuning closing behavior. Adjustable shelves inside the vanity sink base create flexibility after installation, allowing plumbers and installers to position storage levels around existing plumbing runs instead of modifying the cabinet. Solid wood corner blocks and hanging strips together create a reinforced case structure that helps multiple WWV24S units line up plumb and level in a row, which supports faster installation on multi-cabinet jobs.
The WWV24S Warmwood vanity sink base is 24 inches wide, 30-1/2 inches high, and 21 inches deep, which lets installers design bathroom layouts around a defined cabinet footprint.
The door frames use mortised and tenoned solid 3/4 inch maple, creating interlocking joints that help the doors stay square and operate smoothly during repeated use.
The case uses solid wood corner blocks that are glued and power nailed, plus solid wood hanging strips, which together help the cabinet resist racking and hold firmly against wall studs.
The recessed doors use a flat panel plywood insert made from a three-ply panel with a rotary cut hard maple veneer face, providing a stable panel with a maple appearance.
The WWV24S uses a four step process of stain, sealer, sanding, and catalyzed top coat, building a sealed finish suited to normal bathroom moisture and handling.
The Kitchen Kompact Warmwood vanity sink base uses concealed, self-closing hinges, which keep hardware out of sight and pull the doors closed for clean visual lines.
The Kitchen Kompact Warmwood WWV24S vanity sink base combines a 24 inch wide, 30-1/2 inch high, 21 inch deep footprint with mortised and tenoned solid maple doors, three-ply maple veneer panels, and solid wood corner blocks, giving installers a defined, reinforced base for vanity runs. Concealed, self-closing hinges, adjustable shelves, and solid wood hanging strips support clean alignment and adaptable interior space around plumbing. For projects using the Warmwood finish in this size, this vanity sink base aligns cabinet structure, appearance, and dimensions in a single unit ready for integration into a planned bathroom layout.
Sold In: 1 Each