Kitchen Kompact Chadwood base cabinet provides a 48 inch wide, 34-1/2 inch high, 24 inch deep base unit built for continuous kitchen runs. Door frames use mortised and tenoned construction of solid 3/4 inch oak, which creates strong, stable joints that hold alignment during everyday opening and closing. Flat panel plywood inserts use a three-ply panel with a rotary cut red oak veneer face, so fronts present a consistent oak grain surface ready for finishing coordination across a job. Solid wood corner blocks are glued and power nailed, tying the case together for rigidity when the cabinet is set, leveled, and loaded. Solid wood hanging strips are located on the top and bottom, giving installers fixed anchoring points when fastening to wall studs or adjacent cabinets. A four step process of stain, sealer, sanding, and catalyzed top coat is applied, creating a finished surface designed for typical kitchen use. Solid wood toe kicks at 3/4 inch thick provide a firm base profile.
The 48 inch width, 34-1/2 inch height, and 24 inch depth of this Kitchen Kompact Chadwood base cabinet set clear footprint and counter support dimensions for layout. Solid wood hanging strips located on the top and bottom give defined screw zones for anchoring to studs and neighboring cabinets, which simplifies fastening during a straight run. Solid wood corner blocks glued and power nailed help the cabinet resist twisting when shimming under the solid wood 3/4 inch toe kicks, so reveals can be held more consistently. Mortised and tenoned solid 3/4 inch oak door frames work with concealed, self-closing hinges to keep doors tracking correctly once adjusted, reducing hinge-side readjustments after load-in. The front to back epoxy-coated drawer system securely attached to a solid wood strip in the back of the cabinet stabilizes drawer hardware, helping drawers stay aligned after installation.
This Kitchen Kompact 48 inch wide Chadwood base cabinet serves as a large lower unit in kitchen layouts where continuous counter support and storage are needed. Oak flat panel doors with flat panel plywood inserts using a three-ply panel and rotary cut red oak veneer face give a consistent front appearance, so the CW48B ties in visually with other Kitchen Kompact Chadwood cabinets. Adjustable shelves let installers or users position storage levels to suit dishware or small appliances, so the 24 inch deep cabinet volume can be used efficiently. Plywood drawers are standard, and the front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet, which helps drawers track straight when loaded. Drawers equipped with a ball bearing operated nylon roller system support smoother operation over the opening range, which matters in busy kitchen areas where drawers see frequent use.
Door frames built with mortised and tenoned solid 3/4 inch oak create a rigid door structure that works well with concealed, self-closing hinges, helping doors return to a consistent closed position along a run. A four step process of stain, sealer, sanding, and catalyzed top coat is applied, giving the cabinet surfaces a layered finish system designed for daily kitchen contact and routine cleaning. Solid wood corner blocks that are glued and power nailed tie the case together, so when the cabinet is clamped to neighbors and pulled into plane, the box stays true. Solid wood hanging strips located on the top and bottom give predictable fastening zones, which helps keep fasteners placed in strong material rather than thin edges. Solid wood toe kicks at 3/4 inch thick supply a solid interface with shims and finished floor transitions, aiding in long-term line and level. Oak flat panel doors and the red oak veneer face on the inserts coordinate grain and tone, which supports consistent appearance across multiple CW48B units on the same job.
The Kitchen Kompact 48 inch Chadwood base cabinet is 48 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits standard counter depth and height layouts.
The cabinet door frames use mortised and tenoned construction of solid 3/4 inch oak with flat panel plywood inserts, providing a strong frame and a rotary cut red oak veneer face.
The cabinet receives a four step process of stain, sealer, sanding, and catalyzed top coat, giving the oak surfaces a multi-layer finish for typical kitchen use.
The plywood drawers run on a front to back epoxy-coated drawer system attached to a solid wood strip and use a ball bearing operated nylon roller system for smooth travel.
Oak flat panel doors are mounted on concealed, self-closing hinges, so doors close to a consistent position without exposed hinge hardware on the cabinet face.
The cabinet uses solid wood corner blocks that are glued and power nailed, plus solid wood hanging strips at the top and bottom, helping the case stay rigid when fastened.
The Kitchen Kompact Chadwood CW48B 48 inch base cabinet combines mortised and tenoned solid 3/4 inch oak door frames, oak flat panel doors, and a three-ply plywood insert with rotary cut red oak veneer to build a consistent front. Solid wood corner blocks, solid wood hanging strips, and 3/4 inch solid wood toe kicks support a rigid case ready for fastening into a cabinet run. Adjustable shelves, concealed self-closing hinges, and plywood drawers on an epoxy-coated, ball bearing operated nylon roller system create a storage unit suited to active kitchen work areas. For projects using Kitchen Kompact Chadwood components from Wurth Baer Supply, this CW48B base cabinet provides a 48 inch wide, 34-1/2 inch high, 24 inch deep footprint that ties structure and appearance together.
Sold In: 1 Each