Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood vanity sink base GWV24ST is a 24 inch wide, 34-1/2 inch high, 21 inch deep cabinet that provides a dedicated base for a bathroom sink, so installers can plan a consistent vanity run. The recessed panel Glenwood style defines the face appearance, which guides how this unit matches other Kitchen Kompact Glenwood cabinets on the job. The cabinet is part of the Kitchen Kompact cabinet line, so it fits projects that standardize on this product class across a space. The product name identifies it specifically as a vanity sink base, which helps tradespeople separate it from drawer or door base units during layout and ordering.
The vanity sink base measures 24 inches wide, 34-1/2 inches high, and 21 inches deep, so installers can plan floor layout, plumbing locations, and countertop sizing around these fixed dimensions. The solid wood hanging strips on this base cabinet are placed at the top and bottom, which defines where fasteners can tie into framing or adjacent cabinets for a firm installation. Solid wood toe kicks at 3/4 inch thickness give a consistent lower edge that can align with other bases in the room, simplifying trim work and scribe cuts.
This Glenwood V24ST vanity sink base from Kitchen Kompact fits projects that call for a recessed panel look across the bathroom, because the Glenwood style face frame coordinates with other Glenwood cabinets. Solid 3/4 inch oak, maple, or beech frames support hinge and door hardware across the front, which matters when the cabinet is positioned as a primary sink base used many times per day. The 24 inch width allows this unit to serve as a compact sink station, which helps in bathrooms where wall space and traffic clearance are planned tightly. The 34-1/2 inch height and 21 inch depth bring the cabinet into a standard vanity profile, helping countertops and side splashes line up cleanly with neighboring cabinets of the same depth. End panels with a 1/2 inch engineered wood core and hardwood veneers present a hardwood surface on exposed sides, which is useful when the cabinet ends face the room instead of another cabinet or wall.
Mortise and tenon joints on kiln-dried rails, glued for added strength, create a face frame that stays square while the cabinet is clamped, shimmed, and fastened, which reduces rework caused by twist or misaligned doors. Solid wood corner blocks that are glued and power nailed lock the cabinet box geometry, so installers can rely on consistent squareness when they align this vanity sink base with adjacent cabinets and countertops. Solid wood toe kicks at 3/4 inch thick give a firm front base plane that helps when leveling across a run of cabinets, because shims bear on a solid section instead of a thin panel. Solid wood hanging strips at the top and bottom provide predictable structural areas for fasteners, which helps achieve a secure mounting line that stays tight over time. Three-ply end panels with a 1/2 inch engineered wood core and hardwood veneers balance dimensional stability with a hardwood surface, supporting smooth seams where this cabinet meets fillers or finished end panels in a run.
The GWV24ST vanity sink base is 24 inches wide, 34-1/2 inches high, and 21 inches deep, which helps plan floor space, countertop size, and plumbing locations in the bathroom layout.
The cabinet frames use solid 3/4 inch oak, maple, or beech, providing a sturdy face frame that supports hinges and doors through regular bathroom use.
Each rail is kiln-dried, mortise and tenon joined, and glued, producing tight, strong joints that help keep the frame square during installation and long-term use.
The end panels have 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving a stable core with a hardwood facing for exposed sides.
The 3/4 inch thick solid wood toe kicks create a solid lower front edge that supports shimming and alignment across a run of base cabinets.
Solid wood hanging strips are located at the top and bottom of the base cabinet, defining strong areas for fastening the cabinet to framing or adjacent units.
The Kitchen Kompact Glenwood vanity sink base GWV24ST brings solid 3/4 inch hardwood frames, mortise and tenon joints, and 3/4 inch solid wood toe kicks together in a 24 inch by 34-1/2 inch by 21 inch size, giving a defined structure to anchor a bathroom sink area. Solid wood hanging strips and 3-ply end panels with hardwood veneers support stable mounting and finished exposed sides, which helps streamline layout and finishing on site. For projects built around the Glenwood recessed panel style, this vanity sink base provides a matched unit that contributes to a consistent run of Kitchen Kompact cabinets.
Sold In: 1 Each