Kitchen Kompact Chadwood wall cabinet gives you a 48 inch wide, 30 inch high, 12 inch deep wall unit that builds long upper runs with a single cabinet, reducing seams across the wall line. The recessed panel design matches the Chadwood series look, so doors align visually with other cabinets in the run. The cabinet uses solid wood hanging strips at the top and bottom, which provides continuous bearing for wall mounting and supports the cabinet across the span. Door frames are mortised and tenoned from solid 3/4 inch oak, creating a rigid corner joint that helps doors stay square under normal use. Solid wood corner blocks are glued and power nailed, tying the sides to the face frame to add stiffness. A four step process of stain, sealer, sanding, and catalyzed top coat is applied, giving the oak surface a finished film that stands up to typical kitchen environments.
This 48 inch wide Kitchen Kompact Chadwood wall cabinet uses solid wood hanging strips at the top and bottom, so the installer has full width solid wood to fasten through into wall framing. That construction helps distribute cabinet and contents weight across multiple fasteners. The 30 inch height and 12 inch depth match common upper cabinet dimensions, allowing the cabinet to sit in a typical wall run. Door frames built from solid 3/4 inch oak with mortise and tenon joints keep the doors stable while the concealed, self closing hinges handle the swing and closing motion. Adjustable shelves inside can be set to positions that clear stored kitchen items, which keeps the interior functional after the cabinet is mounted.
The Kitchen Kompact 48 inch wide x 30 inch high x 12 inch deep Chadwood wall cabinet works in upper cabinet runs where a long span is needed without breaking the line into several narrow units. In a typical kitchen layout, the 48 inch width can bridge a wider section of wall, above a base cabinet or work area, while maintaining alignment with adjacent 30 inch high wall cabinets. The recessed panel Chadwood doors with flat panel plywood inserts and a rotary cut red oak veneer face allow the cabinet to visually coordinate with other Chadwood units in the same space. Oak flat panel doors tie the look together for a continuous appearance across the wall elevation.
Door frames built from solid 3/4 inch oak with mortised and tenoned joints hold the corners tight, which supports consistent door reveals along the 48 inch span during normal use. Solid wood corner blocks that are glued and power nailed connect sides and frame, helping the cabinet stay square so doors align with the face frame after installation. Solid wood hanging strips at the top and bottom provide reliable fastening zones along the full width, which supports repeatable mounting when multiple fasteners are driven into wall framing. The three ply flat panel with red oak veneer face in the door inserts keeps panel movement managed within the frame, which helps the recessed panel maintain its look over time. The four step stain, sealer, sanding, and catalyzed top coat system establishes a consistent finish film, supporting uniform color and sheen from cabinet to cabinet in a project.
The cabinet is 48 inches wide, 30 inches high, and 12 inches deep, so it matches common upper cabinet depth while spanning a wider section of wall in one unit.
The doors use solid 3/4 inch oak frames with mortised and tenoned joints and a flat three ply plywood panel with a rotary cut red oak veneer face, which supports rigidity and a consistent oak appearance.
The cabinet uses concealed, self closing hinges on the oak flat panel doors, keeping hardware hidden while pulling the doors closed at the end of travel for consistent operation.
Solid wood hanging strips are located on the top and bottom of the cabinet, providing continuous solid wood for fasteners so weight is transferred effectively to the wall structure.
The wall cabinet uses adjustable shelves, allowing shelf positions to be set to different heights so stored items of varying sizes can be arranged efficiently.
The oak surfaces receive a four step process of stain, sealer, sanding, and a catalyzed top coat, creating a finished film suited to typical kitchen environments.
The Kitchen Kompact Chadwood wall cabinet CW48W gives a 48 inch wide, 30 inch high, 12 inch deep upper unit with solid 3/4 inch oak mortise and tenon door frames, flat panel plywood inserts, and oak flat panel doors. Solid wood hanging strips at the top and bottom and glued, power nailed solid wood corner blocks provide a braced cabinet box ready for mounting into wall framing. Adjustable shelves and concealed, self closing hinges finish out the internal layout and door operation so the cabinet can take its place in a Chadwood kitchen run.
Sold In: 1 Each