Kitchen Kompact Warmwood corner wall cabinet describes a 24 inch wide, 36 inch high, 12 inch deep diagonal corner wall unit built for upper kitchen corners. This cabinet uses a recessed panel design that presents a flat panel plywood insert framed by solid maple, so the door shows a clean center field surrounded by solid wood for a classic appearance and stable structure. The door frames use mortised and tenoned construction in 3/4 inch solid maple, which locks each joint into the neighboring piece and helps the frame resist racking when the door is opened and closed repeatedly in a busy kitchen. Solid wood corner blocks are glued and power nailed into place, tying the cabinet corners together so the box stays square under the weight of dishes and daily use. A Warmwood finish is applied using a 4 step process of stain, sealer, sanding and catalyzed top coat, creating a uniform tone that is built up in layers for consistent color and a hardened outer surface suited to kitchen environments.
This Kitchen Kompact 24 inch wide by 36 inch high by 12 inch deep diagonal corner wall cabinet relies on solid wood hanging strips at the top and bottom, giving installers defined structural members to fasten through when mounting to wall framing. Those solid strips help carry the working load of dishes and cookware across the cabinet width, so weight is distributed into the wall rather than concentrated at thin edges. The maple flat panel doors are hung on concealed, self-closing hinges, which locate the hinge hardware inside the cabinet body and pull the doors shut at the end of travel. This concealed, self-closing action keeps the Warmwood recessed panel faces uninterrupted on the outside while bringing doors reliably back to the cabinet front, supporting consistent reveals along adjoining wall cabinets.
The Kitchen Kompact WW24AT diagonal corner wall cabinet is designed as a 24 inch wide, 36 inch high, 12 inch deep corner unit, so it occupies the upper corner run in a kitchen where two wall cabinet lines meet. Its diagonal front presents a face across the corner instead of a sharp angle, which gives a more accessible door opening into the corner storage space. The maple flat panel doors with recessed panel design keep the visible front consistent with other Kitchen Kompact Warmwood cabinets that use maple and flat panel styling, so the corner unit blends into a unified run. Because the door frames are built from solid 3/4 inch maple with mortised and tenoned construction, the door assembly brings solid-wood strength directly to the most handled part of the cabinet, important at a corner where users often reach for frequently used items. The three-ply flat panel insert with rotary cut hard maple veneer face gives the door center both a maple appearance and a layered core, adding stability to the large panel area seen on a corner wall door.
On this Warmwood 24AT corner wall cabinet, solid wood corner blocks glued and power nailed into place tie the cabinet box together at key junctions, which helps retain squareness during installation and under load, reducing the likelihood of door misalignment over time. The solid wood hanging strips at the top and bottom concentrate mounting forces into robust members, so fasteners engage continuous solid wood rather than thin board edges, supporting a more predictable wall mounting result. Adjustable shelves inside the cabinet allow installers or users to set shelf height around dishes or pantry goods, using the interior volume more efficiently while keeping weight distributed across the cabinet sides. Concealed, self-closing hinges manage the door movement by locating the pivot hardware inside the cabinet and drawing doors closed at the end of the swing, which keeps the exterior Warmwood finish uninterrupted and promotes consistent closure without manual latching. The 4 step finishing process using stain, sealer, sanding and a catalyzed top coat builds a layered finish over the maple and veneer faces, giving the working kitchen surface both uniform color and a hardened outer layer suited to routine cleaning and daily contact.
The Kitchen Kompact WW24AT diagonal corner wall cabinet measures 24 inches wide, 36 inches high, and 12 inches deep, so it fits standard upper kitchen layouts needing a Warmwood corner unit.
The door frames are solid 3/4 inch maple built with mortised and tenoned joints, giving interlocking corners that help the doors stay square and operate smoothly through repeated kitchen use.
The recessed doors use a flat panel plywood insert made from a three-ply panel with a rotary cut hard maple veneer face, providing a maple appearance with layered core stability.
This cabinet uses solid wood hanging strips at the top and bottom, so mounting fasteners can pass through these strips into wall framing to support the loaded cabinet.
The maple flat panel doors are fitted with concealed, self-closing hinges, which hide the hardware inside the cabinet and pull doors shut at the end of their swing.
The Warmwood cabinet uses a 4 step process of stain, sealer, sanding and catalyzed top coat, building a layered finish that supports consistent color and a hardened surface.
The Kitchen Kompact Warmwood 24 inch wide by 36 inch high by 12 inch deep diagonal corner wall cabinet with recessed panel maple flat panel doors and concealed self-closing hinges provides a defined solution for upper kitchen corners. Solid 3/4 inch maple mortised and tenoned door frames, three-ply flat panel inserts with rotary cut hard maple veneer faces, solid wood corner blocks, and solid wood hanging strips translate into a rigid box and stable doors for daily work. The 4 step Warmwood finishing process of stain, sealer, sanding and catalyzed top coat ties the cabinet into Warmwood runs while supporting a working kitchen surface. Use this Kitchen Kompact WW24AT unit when a diagonal Warmwood corner wall cabinet with adjustable shelves and concealed, self-closing hinges is needed in a Kitchen Kompact layout.
Sold In: 1 Each